DLP Projector – User’s Manual
6. Pull firmly on the module handle to remove the lamp module.
7. Reverse steps 1 to 6 to in- stall the new lamp module. While installing, align the lamp module with the connector and ensure it is level to avoid damage.
Note: The lamp module must sit securely in place and the lamp connector must be connected properly before tightening the screws.
8. Turn on the projector and reset the lamp after the lamp module is replaced.
Lamp Reset:
Press Menu → Select SETUP >> Advanced >> Lamp >> Reset Lamp Timer→ Press the ◄► buttons to adjust the settings.(see Page 28)
– 35 –
