Photograph Tutorial
Using the Control Panel
The Control Panel can be used to configure camera settings.
1.In the REC mode, press [SET].
This will select one of the Control Panel icons and display its settings.
[ ] [ ] [ ] [ ] | Available settings Control Panel |
[SET]
1
2 3 4 5 6 7 8 9
2.Use [ ] and [ ] to select the setting you want to change.
1 | Photo image size/quality* | 6 | Silent Mode (page 41) |
| (pages 34,61) | 7 | Simple Mode (page 41) |
2 | Video image quality (page 36) | 8 | REC menu display (page 52) |
3 | Flash (page 37) | 9 | Scene Mode scene selection |
4 |
| (page50) | |
5 | Face Tracking (page 40) |
|
|
*Photo image quality cannot be changed using the Control Panel.
3.Use [ ] and [ ] to change the setting.
4.If you want to configure another setting, repeat steps 2 and 3.
5.After all of the settings are the way you want, press [SET]. This will apply the settings and return to the REC mode.
If you selected “MENU”, the REC menu will appear.
If you selected “SCN”, the Scene Mode scene menu will appear.
•You can close the Control Panel by pressing (Disable).
33