Advanced Settings
The following are menu operations you can use to configure various camera settings.
•REC mode menu contents and operations are different from those in the PLAY mode. This section explains operations using the REC menu screen. See page 66 for information about PLAY menu screen operations.
Using On-screen Menus
•Example REC Menu Screen Operation
1.In the REC mode, press [SET].
2.Use [ ] and [ ] to select the second Control Panel option from the bottom (MENU) and then press [SET] (page 33).
This will display the REC menu screen.
3.Use [ ] and [ ] to select the tab where the menu item you want to configure is located.
[] [] [] []
[SET]
4.Use [ ] and [ ] to select the menu item you want, and then press [ ].
5.Use [ ] and [ ] to change the setting of the selected menu item.
6.After the setting is the way you want, press [SET] to apply the setting and return to the viewfinder screen.
•Pressing [ ] instead of [SET] applies the selected setting and returns to the menu item selection.
•To configure settings on another tab after pressing [ ] to return to the menu item selection, use [ ] or [ ] (Delete) to move the highlighting up to the tabs, and then use [ ] and [ ] to select the tab you want.
Example:
When “ Quality” is selected on the “Quality” tab
Tabs
Settings
Selected menu item
52