OWNER,S MANUAL - 13
UNIT OPERATION
AUTOMATIC OPERATION
Automatic operation means that the air conditioner operates automatically by selecting the COOL or HEAT mode and automatically changes the fan speed according to the indoor condition to keep the room temperature comfortable.
PROCEDURE
1 ON/OFF button
A
Press this button and the unit starts AUTO operation.
2 MODE button
If the unit is operating in another mode, press the MODE button to select AUTO.
A |
|
|
| 3 TEMP. ( | ) buttons |
|
|
| |||
ON/OFF |
| SLEEP | Set the desired temperature using the remote control | ||
| TEMP. |
| |||
|
| buttons. |
| ||
|
|
|
|
| |
|
|
| At the start of the AUTO operation, the temperature | ||
MODE |
| FAN | FLAP | is set at 25° c and it is functional within the total | |
| temperature range. | ||||
|
|
| |||
|
|
|
|
| |
CLOCK EVERYDAY HOUR | MINUTE | 4 FLAP button |
| ||
TIMER |
| RESERV. CANCEL |
| ||
ON | OFF | Press this button to control the desired air flow direction. | |||
|
|
|
| ||
RST TA
5 FAN SPEED button
Set the desired fan speed at start up, on AUTO.
6 ON/OFF button
Press this button again to stop operation.
NOTE
•When the room temperature is between 21° c ~ 29° c.
-If the room temperature is lower 1° c or more than the set temperature : HEAT mode will operate
-If the room temperature is higher1° c or more than the set temperature : COOL mode will operate
•When the room temperature is lower than 21° c or higher than 29° c, the operation mode is restricted regardless of the set temperature.
-If the room temperature is lower than 21° c then only the heating mode is allowed.
-If the room temperature is higher than 29° c then only the cooling mode is allowed.
•The Auto operation is not suitable for the application to the computer room or some food/wine stock storage.