OWNER,S MANUAL - 20
UNIT OPERATION
DISCHARGE AIR LOUVER CONTROL
Up and Down Control
The air discharge direction can be controlled to swing up and down and can be fixed at a preferred position or at automatic position by the remote control.
AUTO |
| |
SWING | CLOSE | |
|
| |
|
|
|
| ||
|
| COOL | |
COOL |
|
| |
|
| ||
Fixed | Swing Range | Auto Position | |
HEAT |
| HEAT |
•If you select the Flap position using the FLAP button in the remote control, the flap in the unit will move to that position automatically. Once you select the position, the unit remembers that position and whenever you turn on the unit, the flap will be positioned to that position.
•If you select SWING, the flap will swing up and down. In the COOL, DRY and FAN mode, the flap will swing in the cool range. In the HEAT mode, the flap will swing in the heat range.
•If you select AUTO, the flap will position itself to the preset position according to the operation mode.
NOTE
•Always use the remote control to adjust the flap position, otherwise it may cause abnormal operation. Please turn off the unit and turn it on again when you manually adjust the flap out of range.
Left and Right Control
If you want to adjust the direction of the discharge air left or right, adjust the vertical louver with the handle after opening the flap.
HANDLE
NOTE
•Please do not fix the flap at position for a long time, as this position minimizes air circulation resulting in uneven room temperature.
•Avoid the discharge air being directed towards the occupants for a long period of time.
•Do not adjust the flap by the hand during SWING operation because it may damage the air swing mechanism.