OWNER,S MANUAL - 15
UNIT OPERATION
TIMER OPERATION
ON Timer
A 
PROCEDURE
1 ON TIMER button
Press this button.
On start up, time is set at 6:00 A.M..
2 HOUR, MINUTE buttons
Press these buttons to set the
3 RESERV. button
A
ON/OFF |
|
| SLEEP | |
|
| TEMP. |
| |
MODE |
|
| FAN | FLAP |
EVERYDAY HOUR | MINUTE | |||
CLOCK | ||||
TIMER |
|
| ||
| RESERV. CANCEL | |||
ON |
| OFF | ||
|
|
| ||
Press this button when pointing the remote control towards the receiver of the indoor unit.
•A receiving beep is heard.
•TIMER lamp of the indoor unit illuminates.
4 MODE, FAN, FLAP, and TEMP. buttons
Set the desired operation mode with these buttons.
RST TA
About ON Timer
• When the ON Timer is set, the unit monitors the room temperature for 1hour before the set time to make sure the room condition is reached by the reserve time.
• The actual on time of the unit is earlier that the reserved time by 0 to 40 minutes according to the difference between room temp. and set temp.
NOTE
•The current time is not indicated during the reservation of ON/OFF Time.
•When you want to know the current time, press the CLOCK button and you will see the current time for 5 seconds.
•If you reserve the ON Timer during operation, the unit will operate continuously