Second DMA channel used by the audio interface. | |
|
|
SB Emulation mode. For x, 1 is Off, 0 is On. | |
Set x to 1 to use the | |
| Set x to 0 to use (your) |
| NOTE: See "Understanding the System Resource Settings" for a list of the possible |
| values. |
An example of an SBESET command is
SBESET -A240 -I5 -D3 -w0
which corresponds to "set the SB interface’s base I/O address to 240, the IRQ line used by the audio interface to 5, the First DMA channel used by the audio interface to 3, and use the
SBEGO.EXE
Use this to confirm whether SB16 Emulation is properly installed and working.
Back to Contents Page
file:///C/Terrys/msdos.htm (3 of 3) [1/2/2001 2:10:42 PM]