Determining Resources: Sound Blaster Live! Value Sound Card User's Guide
Back to Contents Page
Determining Resources: Sound Blaster Live! Value Sound Card User's Guide
To find the current SB Live! SB16 Emulation resources in Windows 98 Second Edition:
1.Click the Start button, point to Settings, and then click Control Panel.
2.In the Control Panel window,
3.In the System Properties dialog box, click the Device Manager tab.
4.
5.Click the Resources tab.
You can use the information in the resource list to help you configure
The resource list may show three entries of "Input/Output Range" and two entries of "Direct Memory Access". They correspond to the sequence of entries in Table 1 and Table 3 in the section "Understanding the System Resource Settings". If the number of entries do not match, a good estimate of the identity of the device is its I/O address or DMA channel.
To find the current SB Live! SB16 Emulation resources in
1.Switch to your SB Live! DOS driver directory, that is:
C:\PROGRA~1\CREATIVE\SBLIVE\DOSDRV
2.Type SBECFG and then press Enter
NOTE: The
Some older games may have difficulty detecting the SB Live! card at certain resource settings. Typically, these games would expect the card to be at a fixed set of resources and would fail to load if those resources are not detected. If you have older
Problem: Sound Blaster emulation is not recognized.
Resource: Try switching the SB Emulation IRQ between 5 and 7, use DMA channel 1, use SB interface port 220.
Problem: The
file:///C/Terrys/determin.htm (1 of 2) [1/2/2001 2:17:12 PM]