Back to Contents Page
Overview • SBECFG.EXE • SBEMIXER.EXE • SBESET.EXE • SBEGO.EXE
Overview
The SB Live! Value card includes a few
SBECFG.EXE
Use the SBECFG.EXE utility to obtain the hardware settings and the status of the SB Live! Value card.Typing SBECFG.EXE at the command prompt displays the following hardware settings:
●PCI Hardware Settings: Port, IRQ
●Sound Blaster Emulation: Port, IRQ, DMA
●
●Adlib Emulation: Port
The emulation settings appear only if they are enabled.
SBEMIXER.EXE
Use SBEMIXER.EXE to change the volume levels of the
To set SBEMIXER values in the command line:
At the DOS prompt, type the SBEMIXER command in a single line. Its syntax is:
SBEMIXER [/S:x] [/W:x] [/C:x] [/M:x] [/?]
where square brackets [ ] denote optional parameters, and:
This
Parameter Specifies
file:///C/Terrys/msdos.htm (1 of 3) [1/2/2001 2:10:42 PM]