HP 6671 (LA), 6642D (US), 6641 (LA), 6563Z (US), 6553 (US), 6573Z (US), 8566c (US) manual Introduction

Page 8

U8 Family Product Manual, Rev. B

1

Introduction

This manual describes the functional, mechanical and interface specifi- cations for the ST317221A, ST313021A, ST38410A and the ST34313A. These drives provide the following key features:

•Low power consumption

•Quiet operation

•High instantaneous (burst) data-transfer rates (up to 66.6 Mbytes per second) using Ultra DMA mode 4

•8.9 msec seek time, 5,400-RPM and 512-Kbyte buffer combine for excellent desktop performance

•350 Gs nonoperating shock

•GMR recording heads and EPRML technology, which provide the drives with increased areal density

•State-of-the-art cache and on-the-fly error-correction algorithms

•Full-track multiple-sector transfer capability without local processor intervention

•Support for S.M.A.R.T. drive monitoring and reporting

•Support for Read Multiple and Write Multiple commands

•Support for autodetection of master/slave drives that use cable select (CSEL)

•SeaShield® innovative, shock-absorbing cover shields the drive against electrostatic discharge (ESD) and other handling damage. It also includes installation instructions and jumper settings.

Page 7 Page 9
Image 8
Page 7 Page 9
Contents U8 Family ST317221A, ST313021AST38410A, ST34313A Ultra ATA Interface DrivesU8 Family ST317221A, ST313021AST38410A, ST34313A Ultra ATA Interface DrivesPage Contents U8 Family Product Manual, Rev. BConfiguring and mounting the drive ATA interfaceFigures U8 Family Product Manual, Rev. B Introduction Specification summary table Drive SpecificationST317221A ST313021AST317221A 0 to 60C op., -40 to 70C nonopDrive Specification 1.0 Drive specifications 1.1.1 Default logical geometry1.1 Formatted capacity 1.2 Physical organization1.4 Physical characteristics Drive Specification1.3 Recording and interface technology 1.5 Seek time1.7 Power specifications 1.7.1 Power consumptionSpinup power 1.6 Start/stop timesRead/Write power and current Operating power and currentIdle mode power Seek ModePower Mode 1.7.1.1 Typical current profileTypical Watts Typical Amps RMS1.7.4 Power-management modes Power Modes1.7.2 Conducted noise 1.7.3 Voltage toleranceIdle and Standby timers 1.8 Environmental tolerances 1.8.1 Ambient temperature1.8.2 Temperature gradient Sleep mode1.8.3 Humidity 1.9 Drive acoustics 1.8.6.1 Operating vibration1.8.6.2 Nonoperating vibration 1.12 Agency certification 1.12.1 Safety certification 1.10 Electromagnetic susceptibility1.11 Reliability 1.12.2 Electromagnetic compatibility1.12.3 FCC verification Australian CE-Tick N176U8 Family Product Manual, Rev. B 2.0 Configuring and mounting the drive 2.1 Handling and static-discharge precautions2.2 Jumper settings 2.2.1 Master/slave configuration 7 5 3 8 6 4Options jumper block J8 Master or single drive Drive is slave Cable select2.3 Drive mounting 2.2.2 Cable-select option2.2.3 Ultra ATA/66 cable Figure 3. Mounting dimensions-top, side and end view Note Dimensions are shown in inches mm3.0 ATA interface 3.1 ATA interface signals and connector pinsFigure 4. I/O pins and supported ATA signals Signal nameHost pin # and signal description Drive pin #3.1.1 Supported ATA commands Command nameCommand code in hex ATA-standard commands3.1.2 Identify Drive command Command code in hexWord Descriptionx.xx ValuexxxxH xx07Hxx1FH Bit Word xxA5HDescription if bit is set to Bit Word 3.1.3 Set Features command Set transfer mode based on value in Sector Count register3.1.4 S.M.A.R.T. commands Code in FeaturesS.M.A.R.T. Command RegisterCode in Features Page Page Publication Number SG35226-001, Rev. B, Printed in USA Seagate Technology, Inc920 Disc Drive, Scotts Valley, California 95066, USA
Related manuals
Manual 2 pages 24.33 Kb

6573Z (US) specifications

The HP 8566C, 6573Z, 6647, 6671, and 6641 are examples of cutting-edge test equipment from Hewlett-Packard, now known as Agilent Technologies. Each of these models serves essential functions within the realm of RF and microwave signal analysis, tailored to meet the demands of engineers and technicians in various industries, including telecommunications, aerospace, and electronics.

The HP 8566C is a signal analyzer that provides comprehensive analysis, particularly useful for multi-channel and high-frequency signals. A notable feature of this model is its frequency range, which spans from 0.1 Hz to 26.5 GHz, making it suitable for a wide variety of applications. The instrument's advanced capabilities such as phase noise measurement, frequency response analysis, and spectrogram displays cater to precise and complex signal characterizations. The built-in tracking generator further enhances its utility, enabling users to test filters, amplifiers, and antenna systems efficiently.

On the other hand, the HP 6573Z is a precision DC power supply that is critical for testing and characterizing devices under various power conditions. It delivers high accuracy and stable output across a wide range of voltage and current options. This model integrates features like programmable voltage and current limits, allowing for customized test scenarios, essential for designers needing reliable power sources during the prototyping phase.

The HP 6647 and 6671 models are versatile electronic loads, primarily designed for battery testing and power supply validation. They support various testing modes, including constant current, constant voltage, and constant resistance modes, which provide flexibility for power electronics engineers. Their robust measurement capabilities allow for detailed analysis of response characteristics, load transients, and efficiency metrics.

Lastly, the HP 6641 complements this lineup by offering high-performance test equipment with similar applications in power electronics. It features intuitive interfaces and advanced programming capabilities, enabling streamlined automation of test procedures.

In conclusion, the HP 8566C, 6573Z, 6647, 6671, and 6641 collectively embody sophisticated testing capabilities in signal analysis and power electronics. Their features, ranging from high-frequency performance to accuracy in power delivery, make them indispensable in the modern technological landscape. These instruments support continuous innovation while ensuring the reliability of devices that are critical to both consumer and industrial sectors.
Top Page Image Contents