HP Pro 4300 manual Bezel Blanks, Description Spare part number

Bezel Blanks

Description	Spare part number
5.25-inch bezel blank	570838-001

On some models, there are bezel blanks covering the 3.5-inch and 5.25-inch external drive bays that need to be removed before installing a drive. To remove a bezel blank:

1.Remove the access panel (Computer Access Panel on page 50).

2.Remove the front bezel (Front Bezel on page 51)..

3.To remove a bezel blank, push the two retaining tabs that hold the bezel blank in place towards the outer right edge of the bezel (1) and slide the bezel blank back and to the right to remove it

(2).

Figure 7-4Removing a Bezel Blank

4.Replace the front bezel.

52 Chapter 7 Removal and Replacement Procedures Small Form Factor (SFF) Chassis