To connect the drive:
1Turn on the computer.
2Plug the rectangular end of the USB 2.0 cable (E) into an available USB port on the computer. Plug the square end of the USB 2.0 cable (F) into the USB connector on the back of the HP Media Drive.
NOTE: USB 2.0 uses only one USB connector. USB 1.x systems use both USB connectors.
3Install the software and drivers. Refer to the HP Media Drive documentation for more information.
Locating the Drive and Assigning a Drive Letter
When you plug the drive into an USB 2.0 connector or insert it into an HP Media Drive bay, the operating system automatically assigns a letter to the hard disk drive. The assigned letter depends on other storage devices connected to the computer.
To locate the drive:
1Click the Windows Start Button on the taskbar.
2Click Computer.
3Select the drive under Hard Disk Drives or Devices with Removable Storage. The default volume name of this drive is HP Personal Media Drive or HP Pocket Media Drive.
You can rename the drive in the Computer window by
You can permanently assign a drive letter to avoid the letter changing when you connect and disconnect this drive and other devices. Also, it is easier for a software program to locate the files on the HP Media Drive if a drive letter is assigned. Some programs may not be able to find files if the drive has a new drive letter.