6Connect the cables to the audio system.
7Connect the front, rear, side, and center speakers to the subwoofer. Refer to the speaker documentation.
8Turn on the computer.
NOTE: Always turn on the computer before the speaker system.
9Connect the speaker system to the power.
10Turn on the speaker system.
11After the speakers are connected to the computer, configure the audio software for sound output for your computer model.
Type 6 — multistreaming: See “Configuring multistreaming audio.” The following diagram shows a typical 7.1 audio installation.
| Color | Description |
|
|
|
1 | Lime green | Front audio input |
|
|
|
2 | Black | Rear audio input |
|
|
|
3 | Orange | Center/subwoofer audio input |
|
|
|
4 | Gray | Side audio input (not shown) |
|
|
|
Connecting your home stereo system (optional)
Most home receivers/amplifiers have
Y adapter cables between your computer and your receiver/amplifier. Y adapter cables have one 3.5 mm