Disconnecting the Drive
CAUTION: To avoid hardware damage and data loss, always disconnect the
HP Media Drive safely when it is not saving or transferring files.
You can safely remove the drive when it is not active. When the amber activity light is blinking, the drive is active, saving or transferring data. Removing the drive while the light is blinking may cause data loss or damaged files.
To disconnect the HP Media Drive safely:
1Close all programs that may be accessing the HP Media Drive. Make sure that the activity light on the drive is off.
2
NOTE: For some computers, this may be called the Unplug Hardware or Eject
Hardware icon.
3
4Select HP Media Drive, and then click OK. The name of the drive may be different if you renamed it, or it may appear as Generic Volume followed by the assigned drive letter.
A Safe to Remove Hardware message appears in the system tray, letting you know that the device is safe to disconnect.
5Click Stop to make sure the HP Media Drive is not active, and then click Close.
6Disconnect the drive from the computer.