HP S3000T-P8654V, S3000T-P8654W, S3000T-P8654U manual Quick Setup, Power, Start Up, Voltage

Page 1

7 Power

and Voltage

or

NOTE: Your model may

not include a voltage selection switch. If a switch is available, the voltage is factory set to the correct rating. If in doubt, contact your local power utility.

Presario S0000 Series

Quick Setup

8 Start Up

IMPORTANT: When the computer starts, the system automatically converts the file system on your hard drive. The conversion may take several minutes. Do not stop the process. When the conversion is completed the computer restarts.

When prompted, begin your product registration process. Online instructions guide you through the registration and preinstalled software setup process. The setup time varies by computer configuration.

 

3

1

2

 

©2003 Hewlett-Packard Development Company, L.P. COMPAQ, Compaq, the Compaq logo and Presario are trademarks of Hewlett-Packard Development Company, L.P.

in the United States and other countries/regions. All other product names mentioned herein may be trademarks of their respective companies. Nothing herein should be construed as constituting an additional warranty.

The rating label on the device shows which FCC class (A or B) the equipment falls into. Only Class B devices have an FCC logo or FCC ID on the label. Refer to the corresponding statement for your class. For complete details, read the Safety and Regulatory Information contained in the Warranty and Support Guide.

Image 1
Contents Power Quick SetupStart Up VoltageMonitor ContentsKeyboard Attaching
Related manuals
Manual 18 pages 52.37 Kb