Bosch Appliances MIC612 Outputs Setup Submenu Outputs Setup, Option, Description, None

MIC612 Thermal Camera On-Screen Display (OSD) Menus (Bosch Protocol) en 47

On models with the 35 mm thermal lens, you can also select either High Temp Thermal Meter or Low Temp Thermal Meter, to trigger an alarm on the OSD if the thermal spot meter identifies that the temperature of an object in the view of the camera is outside of the temperature threshold set in the system. By default, the option is "Not Set." For more details,

see Section 8.4 Triggering Alarms On Detection of Objects Outside of Set Thermal Temperature Threshold, page 58.

Outputs Setup Submenu

Outputs Setup...

Exit...

1.NONE

2.NONE

3.NONE

4.NONE

5.NONE

6.NONE

7.NONE

8.NONE

9.NONE

10.NONE

11.NONE

12.NONE

Focus / Iris: Select Type

Right / Left: Select Mode

Outputs Setup Submenu Choices:

Outputs Setup

Defines physical outputs and keyboard commands for use in a rule.

Outputs 1-4

Defines a physical output: N.O. (Normally Open circuit) (default setting) or N.C. (Normally closed circuit).

Outputs 5-12

Defines a command output for use in a rule.

Option	Description
NONE	(Default setting) No command defined.
Aux On	Responds to a keyboard ON command.
Aux Off	Responds to a keyboard OFF command.
Shot	Responds to a Preset shot.
OSD	Displays the output on the on-screen display.

Transmit Transmits a message back to the head end (available with RS-232 serial and Bilinx connections).

Bosch Security Systems, Inc. Installation Manual F.01U.249.416 2.0 2012.09