48 en | MIC612 Thermal Camera |
|
|
Rule Setup Submenu
NOTICE!
You can program a total of twelve rules. You must define the inputs and outputs before you program a rule. See Section 6.7 Alarm Setup, page 46, to configure alarm inputs and outputs.
Rule Setup... |
| Rule 1 |
| |
Exit... |
|
| Exit... |
|
1. Rule 1 | Enabled |
| Enabled | YES |
2. Rule 2 | Disabled |
| Input: |
|
3. Rule 3 | Invalid |
| NONE |
|
4. Rule 4 | Empty |
| NONE |
|
5. Rule 5 | Empty |
| NONE |
|
6. Rule 6 | Empty |
|
|
|
7. Rule 7 | Empty |
| Output: |
|
8. Rule 8 | Empty |
| OSD |
|
9. Rule 9 | Empty |
| Shot 2 |
|
10. Rule 10 | Empty |
| Alarm Relay | 2 sec |
11. Rule 11 | Empty |
| NONE |
|
12. Rule 12 | Empty |
|
|
|
|
|
| Right / Left: Select Period Time | |
Focus / Iris: Select |
| Focus / Iris: Select Type |
Rule Setup Submenu Choices:
Rule Setup
Displays the status of rules and lets you add new rules or modify an existing rule.
Rule
Displays the status of a rule on the right side of the menu. Rule status options:
Option Description
Enabled The rule inputs and outputs are properly defined and the rule is turned on.
Disabled The rule inputs and outputs are defined but the rule is turned off.
Invalid The rule has a missing or invalid input or output.
Empty (Default setting) The rule has no inputs or outputs defined.
Selecting a Rule number provides access to its configuration menu. The Rule # Menu allows you to configure a rule from
Rule # Choices:
Enabled
Turns the rule on or off after its inputs and outputs have been defined.
YES to enable or NO to disable (default setting)
F.01U.249.416 2.0 2012.09 | Installation Manual | Bosch Security Systems, Inc. |