Bosch Appliances MIC612 3.3About the MIC Shielded Composite Cable, About Alarm Inputs and Outputs

16 en Installation OverviewMIC612 Thermal Camera

3.3About the MIC Shielded Composite Cable

MIC shielded composite cables are multi-conductor cables of various lengths (and gauges ranging from 14 - 18) that provide all power, video, and telemetry connections between the MIC PSU and the MIC camera. The cables are pre-made with a female-terminated 14-pin connector at one end for attachment to the male connector installed into the base of the camera. The other end of the cables has free (non-terminated) wires for wiring into terminals in the MIC PSU.

Figure 3.6 Composite cable before connection to MIC612 camera

Figure 3.7 Composite cable connected to MIC612 camera

NOTICE!

Bosch does not recommend using the composite cable for distances greater than 25 m between the MIC camera and the power supply.

To prevent water penetrating the composite cable connector threads, seal the 25 mm thread at final installation using PTFE tape. Alternately, a suitable sealant may be liberally applied to the thread prior to final tightening.

3.4	About Alarm Inputs and Outputs
		The table below identifies the number of alarm inputs and outputs available with and without
		an 8-input alarm card installed in the MIC PSU.
		Alarm Card	Number of	Number of
		Installed?	Alarm Inputs	Alarm Outputs
		Yes	8	2
		No	1	0

F.01U.249.416 2.0 2012.09 Installation Manual Bosch Security Systems, Inc.