Bosch Appliances MIC612 Diagnostics Menu, Alarm Status, Bist, Internal Temp, High Temp Events

50 en On-Screen Display (OSD) Menus (Bosch Protocol)MIC612 Thermal Camera

6.9	Diagnostics Menu
		The Diagnostics menu contains a list of diagnostic tools and events. Most of these menu
		items are display items only; you cannot select different values to change.
			Diagnostics
		Exit...
		Alarm Status...
		BIST...
		Internal Temp:		Deg F / Deg C
		High Temp Events:		Deg F / Deg C
		Highest Temp		Deg F / Deg C
		Low Temp Events:		Deg F / Deg C
		Lowest Temp:		Deg F / Deg C
		Internal Humidity		%
		Humidity Events		0
		Security Access:		0
		CTFID Access:		0
		Restart Events:
		Power-up Events:		0
		Low-Volt Events:		0
		Video Loss Events:		0
		Total Time On		0hr 0min
		Thermal Camera Test Pattern On/Off
		Focus / Iris: Save and Exit
		Alarm Status
		Enters the Alarm Status menu and displays the real time status of alarm inputs and outputs.
		Alarm Inputs 1 to 8, Alarm Outputs 1 to 2 (Closed or Open)
		BIST
		Enters the Perform Built-in Self Tests menu. YES to start test. If confirmed, the BIST tests
		start and the results are displayed. Typical results are:
		Data Flash:	PASS
		FPGA:	PASS
		Bilinx:	PASS

Internal Temp.

Displays the current temperature of the camera, in degress Fahrenheit and in degrees Celsius.

High Temp Events

Displays the number of times that the threshold of high temperature was exceeded.

Highest Temp

Displays the highest temperature reached, in degrees Fahrenheit and in degress Celsius.

Low Temp Events

Displays the number of times that the threshold of low temperature was exceeded.

Lowest Temp

Displays the lowest temperature reached, in degrees Fahrenheit and in degress Celsius.

F.01U.249.416 2.0 2012.09 Installation Manual Bosch Security Systems, Inc.