Bosch Appliances MIC612 installation manual On-ScreenDisplay OSD Menus Pelco Protocol

MIC612 Thermal CameraOn-Screen Display (OSD) Menus (Pelco Protocol) en 53

7	On-Screen Display (OSD) Menus (Pelco Protocol)
		This chapter identifies and describes each OSD menu option, as well as the default setting for
		each option, for Pelco protocol. For step-by-step instructions, see Section 9 Common User
		Commands, page 59 and Section 10 Advanced Features, page 62.
		To open the main Setup Menu in Pelco protocol: Press 95-PRESET for approximately 2
		seconds. The screen Setup Menu appears.
		Setup Menu
		Exit...
		Command Lock:	OFF
		Bosch Menu
		Camera Setup
		PTZ Setup
		Edit Password
		*FastAddress:	Not Set
		Advanced
		Software Version
		Ack and Reset Alarms
		Restore All Settings
		Reset All Memory
		* = Factory Setting
		Focus / Iris: Select
		Setup Menu Choices:
		Menu	Description
		Exit	Exits the menu.
		Command Lock	Allows or prohibits accessing locked commands. (If password is set,
			you are prompted to enter the password. The default setting is ON.
		Bosch Menu	Accesses the full MIC612 configuration menu and all MIC612
			settings.
		Camera Setup	Accesses adjustable camera settings such as White Balance and
			Night Mode.
		PTZ Setup	Accesses adjustable pan/tilt/zoom (PTZ) settings such as tours, scan
			speed, edit presets, limit stops, recording, and AutoPivot settings.
		Edit Password	Changes the password.
		FastAddress	Sets or changes a camera address.
		Advanced
		Software Version	Displays the current software versions.
		Ack and Reset Alarms	Acknowledges and resets active alarms.
		Restore All Settings	Restores all settings to their original default setting.
		Reset All Memory	Clears all settings, including scene shots, tours, and recordings
			stored in the MIC612 memory.

NOTICE!

If commands are locked and you press Focus or Iris, the camera displays the on-screen message: “Command is Locked.”

Bosch Security Systems, Inc. Installation Manual F.01U.249.416 2.0 2012.09