MIC612 Thermal Camera

Installation en 27

 

 

NOTICE!

You must connect the overall shield drain wire of the composite cable to the power supply chassis in order to ground the chassis. Crimp the drain wire to the ring terminal lug attached to the mounting screw of the PCB located to the right of BNC socket CN3 (Video Switched). Refer to Figure 4.3 for the location of the screw.

*If connecting a heater, see Section 4.4.5 Commissioning the Camera with Heater Option Fitted.

19.Slide back the cable so that the shield is in the middle of the gland.

20.Tighten the cable gland so that it grips firmly the shielded composite cable. It is important that the braided cable screen engages with the internal clamps of the cable gland to ensure correct EMC protection.

21.If necessary, connect a tamper switch to terminal block HD2.

22.Make the necessary video connections. Feed the coaxial cable of your choice--see the table below to identify the recommended cable types, maximum distance, and other specifications for the coax video connection between the MIC power supply and the head-end control system--through the top-left M12 cable gland (item 1, Figure 4.7).

Cable Type; Maximum Distance

RG-59/U; 300 m (1000 ft)

 

RG-6/U; 450 m (1500 ft)

 

RG-11/U; 600 m (2000 ft)

Size

O.D. between 4.6 mm (0.181 in.) and 7.9 mm (0.312 in.)

Shield

Copper braid: 95%

Central Conductor

Standard copper center

23.Crimp the end of the cable with a BNC terminal connector.

24.Connect the Video Out cable to BNC socket CN1.

25.For dual video output only: If needed, remove the blanking plug that covers the hole for the bottom-left M12 cable gland (item 3, Figure 4.7). Feed a second Video Out cable through the cable gland, and then connect the switched Video Out cable to BNC socket CN3. This second cable provides control for video from both the optical camera and the thermal camera; users can switch between the two cameras.

26.Feed telemetry cable through the bottom-right M12 cable gland (item 4, Figure 4.7).

27.Connect head-end RS-485 control to terminal block HD5, as indicated in the table below:

PCB Marking

Telemetry

Connection Description /

Pin Number

(non-IR PCBs)

Signal Name

Function

 

RxB

Rx +

RS485+ to camera

1

RxA

Rx -

RS485- to camera

2

0V

Ground

0V from control room

3

TxA

Tx -

RS485- to control room

4

TxB

Tx +

RS485+ to control room

5

Note: The terminal block is positioned with the screw terminals on the left, next to the fuses. Pins are numbered from top to bottom in that orientation. Non-IR PSU PCBs are marked.

28.If connecting to additional add-on cards (for example, a card for 8-input alarms (MIC- 516ALM) or for 8-input alarms plus washer pump drive (MIC-ALM), and/or a Biphase card (MIC-BP4)), remove the second blanking plug that covers one of the holes for an M12 cable gland (item 3, Figure 4.7). Attach the supplied M12 gland. Make the appropriate connections to plug-in terminal CN2.

NOTICE!

For installation of the MIC 8-input Alarm Card (MIC-ALM) or Biphase converter (MIC-BP4), please refer to their respective manuals.

Bosch Security Systems, Inc.

Installation Manual

F.01U.249.416 2.0 2012.09

Page 27
Image 27
Bosch Appliances installation manual MIC612 Thermal Camera Installation en

MIC612 specifications

The Bosch Appliances MIC612 is an innovative and highly efficient piece of kitchen equipment that enhances the culinary experience for home chefs and professionals alike. Renowned for its quality, Bosch has developed this compact microwave that combines advanced technology with user-friendly features.

One of the standout characteristics of the MIC612 is its sleek design, seamlessly incorporating into various kitchen styles. With its stainless-steel finish, the microwave not only offers aesthetic appeal but also ensures durability and easy maintenance. Its compact size makes it an ideal fit for smaller kitchens or areas where space is limited, while still providing ample cooking capacity.

The MIC612 is equipped with intelligent cooking technology. This includes sensor cooking, which automatically adjusts cooking time and power levels based on moisture detected in the food. This feature simplifies meal preparation by eliminating the need for constant monitoring, ensuring perfectly cooked dishes every time. Additionally, the microwave offers multiple cooking modes, including reheating, defrosting, and cooking with precision.

For those who appreciate convenience, the MIC612 includes pre-programmed settings for common foods like popcorn, pizza, and baked goods. This allows users to enjoy a wide variety of meals with minimal effort. The intuitive control panel and clear digital display enhance the ease of use, enabling quick selection of settings and cooking times.

Safety is a paramount concern for Bosch, and the MIC612 does not disappoint. It features a child safety lock, ensuring that curious little hands cannot accidentally operate the appliance. Moreover, the design incorporates a reliable cooling system to prevent overheating and ensure longevity.

Energy efficiency is another highlight of the Bosch MIC612. It is designed to consume less power compared to traditional microwaves, making it an eco-friendly choice without compromising performance. The combination of cutting-edge technology, thoughtful design, and practical features makes the Bosch Appliances MIC612 a valuable addition to any kitchen, offering versatility and reliability for all cooking needs. Whether reheating leftovers or preparing a fresh meal from scratch, this microwave stands out as a remarkable option for modern culinary tasks.