IBM R30 manual Recover pre-installed software, Solving computer problems

Solving computer problems

Recover pre-installed software

If the data on your hard disk drive is damaged or accidentally erased, you can restore the software that was shipped with your computer. This software includes your pre-installed operating system, applications, and device drivers.

To restore your pre-installed software, you can use the Product Recovery program.

The Product Recovery program is in a section of your hard disk drive that is not displayed by Windows Explorer.

Note: The recovery process might take up to 2 hours.

Attention

All of the files on the C:\ drive will be lost in the recovery process. Be sure to back up copies of the files you have saved on your C:\ drive before you begin.

Note: You might need to use a CD, DVD, or a diskette drive in the recovery process. Use a drive that is compatible with your computer.

To use the Product Recovery program to restore your pre-installed software, do the following:

1.Save all your files and shut down your desktop.

2.Turn off your computer.

3.Turn on your computer. Quickly press F11 when this message is displayed on the screen: ″To start the Product Recovery program, press F11.″ This message is displayed for only a few seconds.

Note: If this message is not displayed, you can use a Recovery Repair diskette to get access to the Product Recovery program.

4.From the list displayed on the screen, select the operating system you want to recover.

5.Select the recovery options you want, and follow the instructions on the screen.

6.Restart the system. Your computer will restart with the pre-installed operating system, drivers, and software.

Chapter 2. Solving computer problems 33