IBM R30 manual Software problems, Solving computer problems

Solving computer problems

Solution: The DVD movie playback software is reading the DVD. Wait for a few seconds before trying the buttons again.

Problem: A CD cannot be written.

Solution: Make sure the CD you placed in the CD-RW or DVD/CD-RW drive is either a CD-R or CD-RW. If you are writing to a CD-R, make sure it is blank.

Note: You can write CDs if your computer has a CD-RW or DVD/CD-RW drive and a CD recording software is installed.

Problem: A written CD has errors.

Solution: Make sure your computer is protected from vibration when writing to a CD. Even typing on the computer will cause vibration that may result in errors in the written CD or even a damaged and unreadable CD.

Note: You can write CDs if your computer has a CD-RW or DVD/CD-RW drive and a CD recording software is installed.

Software problems

Problem: An application does not run correctly.

Solution: Make sure that the problem is not being caused by the application by checking the following:

vYour computer has the minimum required memory to run the application. Refer to the manuals supplied with the application.

vThe application is designed to operate with your operating system.

vOther applications run correctly on your computer.

vThe necessary device drivers are installed.

vThe application works when it is run on some other computer.

If an error message appears when you are using the application program, refer to the manuals supplied with the application.

If the application still does not run correctly, contact your place of purchase or a service representative for help.

Problem: The Windows Safe Mode screen appears.

Solution: Your computer may not have shut down properly the last time. In Safe Mode, shut down and restart your computer.

30ThinkPad® R30 Series Service and Troubleshooting Guide