IBM R30 manual For the modem with approval number PTC 211/01/081

Notice for New Zealand

For the modem with approval number PTC 211/01/081

vThe grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom’s network services.

vFunctional tests

This equipment is not capable, under all operating conditions, of correct operation at the higher speeds for which it is designed. Telecom will accept no responsibility should difficulties arise in such circumstances.

vFail safe requirements

Under power failure conditions this appliance may not operate. Please ensure that a separate telephone, not dependent on local power, is available.

vAutomatic re-attempts to the same number

Some parameters required for compliance with Telecom’s Telepermit requirements are dependent on the equipment (PC) associated with this device. The associated equipment shall be set to operate within the following limits for compliance with Telecom’s Specifications:

–There shall be no more than 10 call attempts to the same number within any 30 minute period for any single manual call initiation, and,

–The equipment shall go on-hook for a period of not less than 30 seconds between the end of one attempt and the beginning of the next attempt.

vFor automatic calls to different numbers

Some parameters required for compliance with Telecom’s Teleprint requirements are dependent on the equipment (PC) associated with this device. In order to operate within the limits for compliance with Telecom’s specifications, the associated equipment shall be set to ensure that automatic calls to different numbers are spaced such that there is not less than 5 seconds between the end of one call attempt and the beginning of another.

vFor automatic call set-up

This equipment shall not be set up to make automatic calls to Telecom’s 111 Emergency Service.

vCall answering

Some parameters required for compliance with Telecom’s Teleprint requirements are dependent on the equipment (PC) associated with this device. In order to operate within the limits of compliance with Telecom’s

Appendix C. Notices 71