INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.
Tools needed
■Drill with 1¼" (3.0 cm) drill bit
■Pencil
■Wire stripper or utility knife
■Tape measure or ruler
■Pliers
■Caulking gun and weatherproof caulking compound
■Jigsaw or keyhole saw
■
■Metal snips
■Phillips screwdriver
Parts needed (quantities of parts are determined by installation requirements)
■Home power supply cable
■Vent clamps
■Wall or roof cap
■6" (15.2 cm) diameter vent duct for connection to motorized damper. (Lengths are determined by installation requirements.)
■UL listed wire connectors
■½" (12.7 mm) UL listed or CSA approved strain relief
Parts supplied
Remove parts from packages. Check that all parts are included.
3¼ x 10" (8.3 x 25.4 cm) Rectangular Makeup Air Kit (W10446914)
■3¼ x 10" (8.3 x 25.4 cm) makeup air switch duct
■6" (15.2 cm) motorized damper
■T10 Torx®† adapter
6" (15.2 cm) Round Makeup Air Kit (W10446915)
■6" (15.2 cm) round makeup air switch duct
■6" (15.2 cm) motorized damper
■T10 Torx®† adapter
8" (20.3 cm) Round Makeup Air Kit (W10446916)
■8" (20.3 cm) round makeup air switch duct
■6" (15.2 cm) motorized damper
■T10 Torx®† adapter
10" (25.4 cm) Round Makeup Air Kit (W10446917)
■10" (25.4 cm) round makeup air switch duct
■2 - 6" (15.2 cm) motorized damper
■T10 Torx®† adapter
Location Requirements
IMPORTANT: Observe all governing codes and ordinances.
Have a qualified technician install this makeup air kit. It is the installer's responsibility to comply with installation clearances specified.
Grounded electrical outlet is required. See “Electrical Requirements” section.
All openings in ceiling and wall must be sealed.
Product Dimensions
Makeup Air Switch Duct (installed on the range hood)
6" (15.2 cm) Kit W10446915 8" (20.3 cm) Kit W10446916
|
|
| 7⁹⁄₁₆" |
|
|
| (19.2 cm) |
| 7¹⁄₈" |
| 9¹⁵⁄₁₆" |
| (18 cm) | 8⁷⁄₈" | (25.2 cm) |
6¹³⁄₁₆" |
| (22.5 cm) |
|
(17.2 cm) | 6¹⁵⁄₁₆" |
|
|
|
|
| |
| (17.6 cm) |
|
|
10" (25.4 cm) Kit | 3¼" x 10" (8.3 x 25.4 cm) Kit | |
W10446917 | W10446914 | |
| 3¹⁄₄" | 10" |
| (8 cm) | (25.4 cm) |
9⁹⁄₁₆" |
|
|
(24.3 cm) 12" |
| 5⁷⁄₈" |
(30.4 cm) |
| (14.9 cm) |
10¹⁵⁄₁₆" |
|
|
(27.7 cm) |
| 5¹⁵⁄₁₆" |
|
| |
|
| (15.1 cm) |
6" (15.2 cm) Motorized Damper (installed for outside air intake)
6" (15.2 cm)
9¹⁄₂"
(24 cm)
®†TORX is a registered trademark of Saturn Fasteners, Inc.
4
