Bosch Appliances MIC612 Configuring Preposition Tours, Programming the Inactivity Operation

60 en Common User Commands MIC612 Thermal Camera

To clear a character from a title:

1.Use the joystick to highlight the Clear OR Position Character prompt.

2.Move the joystick left or right until the cursor is below the title character that you need to clear.

3.Press Focus/Iris to clear the character.

4.Move the joystick up to bring the cursor back into the character palette.

To save a title:

1.Use the joystick to highlight the Exit prompt.

2.Press Focus/Iris to save the title.

9.4 Configuring Preposition Tours

A Preposition Tour automatically moves the camera through a series of preset or saved shots. The MIC612 has one (1) standard preset tour and one (1) customized preset tour. Tour 1 is a standard tour that moves the camera through a series of shots in the sequence that they were set. Tour 2 is a custom tour that allows you to change the sequence of shots in the tour by inserting and deleting scenes.

To start Preposition Tour 1:

1.Set a series of preset shots in the order that you want the MIC612 to cycle through.

2.Press ON-8-ENTERto start the tour. The tour then cycles through the series of shots until

it is stopped.

To stop a Preposition Tour:

Press OFF-8-ENTERor move the joystick to stop either type of tour.

To add or remove scenes to Preposition Tour 1:

1.Press SHOT-900-ENTER to access the Add/Remove Scenes Menu.

2.Use the Focus/Iris buttons to add or remove the selected scene from the tour.

To start custom Preposition Tour 2:

 Press ON-7-ENTERto start a tour. The tour cycles through the series of shots (in the order that they were defined) until it is stopped.

To edit a custom Preposition Tour 2:

1.Press SET-900-ENTER to access the Add/Remove Menu.

2.Press the Focus/Iris buttons to add or remove the selected scene.

To change the dwell period of a tour:

1.Press ON-15-ENTER to access the Tour Period Menu.

2.Select the tour (Tour 1 or Tour 2) and follow the on-screen instructions.

9.5 Programming the Inactivity Operation

You can program the MIC612 to change its operating mode automatically after a period of inactivity.

To access the Inactivity mode (locked command):

1.Press OFF-90-ENTERto turn off the command lock.

2.Press ON-9-ENTER to access the Inactivity Mode Menu.

3.Select one of the following choices:

–Return to Scene 1: Returns the camera position to Shot 1.

–Recall Previous Aux: Returns the camera to the previous operating mode, such as a Preposition Tour.

F.01U.249.416 2.0 2012.09 Installation Manual Bosch Security Systems, Inc.