Enabling/Disabling Marker Types
Menu [6] + Setup [SK] + Marker Type [SK]
The unit will default with all markers enabled (✓).
1.Press the up/down arrows [SK] to highlight a utility to enable or disable.
2.Press Enabl/Disabl [SK].
−−Only the markers that are enabled (✓) will be available in the locate mode.
3.Press OK [5] to save settings or Exit [SK] to cancel.
Locating 3M™ EMS Markers
Alert Mode (3M™ Dynatel™ Models 2250ME-iD and 2273ME-iD only)
While tracing a cable or pipe, it is possible to search for markers.
1.Press Alert [SK].
−−If the unit is in DirPk or DirNull, a prompt will notify the operator that alert mode only functions in Special Peak mode.
2.Press Mode [SK Toggle] for SplPk.
3.Press Alert On [SK Toggle].
−−The receiver screen will add the Alert bar graph and the type of marker to the screen with a prompt to adjust the marker gain.
4.Press the Gain Adjust [4] until only a small mark on the marker bar graph is visible.
5.Press Locate/OK [5] to save the marker gain setting.
| 29 |
