Receiver Setup
1.Press ON/OFF [1] to turn the receiver on.
2.Press Locate [5].
3.Press Tone/Ext [SK] to select Tone mode.
4.Connect a second coupler to the Receiver’s EXTERNAL JACK [13] using the earth frame cable or another coupler cable.
5.Press Freq [SK Toggle] to select the highest transmitter frequency (133K).
6.Check the first cable in the group by clamping the coupler around the cable.
7.Press Gain/Down [4] and observe the numerical signal strength [10].
8.Remember the number and continue by clamping the coupler around the next cable in the group.
−−If the signal strength [10] is greater than the previous observation, press Gain/ Down [4].
−−If the signal strength is less than before, ignore it.
−−After checking all the cables in the group, the cable with the highest reading is the target cable.
Help Mode
Menu[ 6] + More>> [SK] + Help [SK]
The help screen contains basic information about the unit and its operation. It is designed to be a quick reference guide.
1.Press the double up/down arrows [SK] to navigate between sections.
−−The single up/down arrows [SK] will scroll the screen line by line.
3M™ Dynatel™ PC Tool Kit
The Dynatel PC Tool Ksoftware is available for download, at no cost, at www.3M.com/ dynatel.
The Dynatel PC Tool Kit provides the user an excellent interface between the receiver and a PC. This software utility provides the tools by which the user can:
•Upgrade the receiver to the latest software revision
•Program the receiver to best suit specific applications
•Load an alternate language in the receiver
•Provide a 3M™ EMS iD Marker utility.
The 3M™ EMS iD Marker utility can be used to:
•Create templates for programming iD markers
46 |
