7.Self Test: Displays information about unit and performs a self check test
8.Help: Offers the user
Configuring The Receiver
In the setup mode, the units of depth measurement, time, date, and date format can be set. The receiver can be configured to detect only certain frequencies and/or specific utility markers. User defined frequencies can be programmed, language of the receiver can be selected, and tone frequencies set.
Select Depth Units
MENU [6] + More>>[SK] + Setup [SK] + Units [SKToggle]
•Press Units [SK toggle].
•The soft key command will toggle between inches (in), centimeters (cm), and feet/inches
Setting the Receiver Clock
Set the time, date, and date format of the receiver. Depth and Current measurements are time and date stamped, as well as read write marker information (iD units only).
MENU [6] + More>>[SK] + Setup [SK] +Clock [SK]
•Press the left/right arrow [SK] to highlight the digit of the date or time to change.
•Press the + or - [SK] to increment or decrement.
•When the date format is highlighted, the format will toggle between mm/dd/yy and dd/mm/yy.
•Press OK [SK] to save, or Menu [6] to cancel.
Selecting a Language
MENU [6] + More>>[SK] + Setup [SK] + Lang [SKToggle]
The soft key command will cycle through available languages. Alternate languages can be uploaded to the receiver using the Dynatel™ PCTools software. (Available for download at www.3M.com/dynatel.)
12 |
