Manuals / 3M / Lawn and Garden / Metal Detector

3M 2273ME-iD, 2250ME-iD manual Maximum Transmitter Output, Rechargeable Battery, mWARNING

Models: 2273ME 2250ME 2250ME-iD 2273ME-iD

1 52

Download 52 pages 28.1 Kb

Page 8

Maximum Transmitter Output

Maximum Transmitter Output

An external 12V DC source is required for 12-Watt Output. Connecting the rechargeable battery (2200RB) to the external jack [T-7] will provide this external source, or the cigarette lighter adapter cable (included with high powered units) can be used to connect the DC power from a vehicle’s battery source to the transmitter’s external jack {T-7}.

Press Output [T-5] twice for maximum output mode.

The indicator flag will flash when the transmitter is in max output mode.

Note: The external DC source does not charge the internal batteries.

mWARNING

To reduce the risk associated with hazardous voltage:

•Potential for electric shock exists when handling connection cables while the transmitter is ON. Make all connections prior to powering on the unit. Turn transmitter OFF before handling connection cables.

•Voltage greater than 240 volts will damage equipment and could cause personal injury or death. Make all connections before turning on the transmitter. Follow standard procedures for reducing the voltage.

•Do not change or modify this product in any way.

Rechargeable Battery

The 3M Dynatel Sealed Gel-Cell Battery 2200RB can be used as an auxiliary battery in 3M™ Dynatel™ 2200 Series Transmitters. It plugs into the external jack [T-7] and provides power for the transmitter. When the rechargeable battery is plugged in, normal output, high output, and maximum output is available. When the rechargeable battery is connected to the transmitter, the alkaline batteries are bypassed. The rechargeable battery is a lead acid battery rated at 5.4 amp-hours and is equipped with a user replaceable fuse (5A/32V).

Note: The internal batteries must be at least 5.4 volts. Do not remove the alkaline batteries from the transmitter when using the rechargeable battery.

8	78-8130-6151-8-E

Image 8

3M 2273ME-iD, 2250ME-iD manual Maximum Transmitter Output, Rechargeable Battery, mWARNING

Contents

3M Dynatel 2250ME 2250ME-iD2273ME 2273ME-iDFebruary 78-8130-6151-8-EContents 78-8130-6151-8-E Safety Information About This ManualIntended Use Do not throw away in normal trashmCaution Transmitter Battery InstallationQuick Start mCaution Receiver Battery InstallationCleaning DISPLAY T-4 Service and AccessoriesTransmitter Keypad and Connector Definitions mWARNING Rechargeable BatteryMaximum Transmitter Output Receiver Key Pad Definitions Menu Screens Main Menu5.Back Returns to previous screen Configuring The Receiver Setting the Receiver ClockSelect Depth Units Selecting a LanguageEnabling/Disabling Frequencies Creating User Defined Frequencies78-8130-6151-8-E Filtering Power Frequency InterferenceSelecting Locating Audio Direct Connect Method Buried Cables And PipesTransmitter Connections Dyna-CouplerMethod 78-8130-6151-8-EInduction Method 78-8130-6151-8-EReceiver Modes Directional PeakDirectional Null Left of Target PathSpecial Peak Inductive Peak IndPkDepth and Current Estimate Expanded ModePower FrequenciesActive 3.Press Cable/Pipe SKLocating in Directional Peak Mode PassiveAuxiliary 2.Press Cable/Pipe SK9.Press Power 1 to turn on the receiver 78-8130-6151-8-E Locating Active Duct Probes Sondes Determining ADP DepthPinpointing the Buried Fault Buried Sheath Faults And Earth/Return FaultsTransmitter Setup 78-8130-6151-8-E E-ModelInitial Configuration 3M Electronic Markers and 3M EMS iD Markers9.Press Initial Configuration 10.Press Download mWARNING2.Press Enabl/Disabl SK Locating 3M EMS MarkersEnabling/Disabling Marker Types Single Marker Locate Dual Marker LocateMarker Depth Estimate ID Marker DepthDepth of Passive, Non-iDMarker Creating New Templates Creating/Editing Templates for 3M EMS iD Markersa.UserEdit Editing Templates 78-8130-6151-8-E8.Press Start Write SK Writing iD Markers5.Press Write Marker SK Modifying Marker Data to be Programmed Reading iD Markers GPS Operation Activation KeySerial Number and Software Version Inputting the GPS Activation KeyCommunicating with the GPS unit Capturing the GPS Coordinates Capture Mode / ModePath Mapping with GPS Create Trace TemplatesSelect Com Port Setting Sending Path Information to GPS DeviceWrite History SK Reviewing Marker HistoryRead History Other Applications Aerial Faults ToningConnection Diagrams Cable Identification Transmitter Setup3M Dynatel PC Tool Kit Receiver SetupHelp Mode Product Description Product Description And Optional AccessoriesSelf Test Of Receiver Package Contents Optional 3M Dynatel AccessoriesStandard Packages Part NumberReceiver Specifications SpecificationSpecification Near-SurfaceTransmitter Specifications SpecificationTrack and Trace Solutions Warranty Limited Remedy Limited LiabilityImportant Notice 6801 River Place Blvd