HP D510 manual Hard Drive Installation Guidelines

Page 50

Hard Drive Installation Guidelines

✎When configured to operate in Quiet mode, the drive will not operate at maximum performance levels. For maximum drive performance, set the drive to operate in Performance mode.

To determine if your computer contains a Quiet Drive or to activate Quiet mode, complete the following steps:

1.Turn on or restart the computer. If you are in Windows, click Start > Shut Down > Restart the Computer.

2.When the F10 = Setup message displays in the lower-right corner of the screen, press the F10 key.

✎If you do not press the F10 key while the message is displayed, you must restart the computer to access the utility.

3.Select your language from the list and press the Enter key.

4.A choice of five headings displays in the Computer Setup Utilities menu. Using the arrow keys or the Tab key, select Storage > Device Configuration.

5.Select the drive from the list of devices. Press the Enter key.

6.Select Quiet Drive > Quiet (Performance is the factory-set default.)

✎If the Quiet Drive option is not displayed, your computer does not contain a Quiet drive.

7.To apply and save changes, select File > Save Changes.

B–8	Hardware Reference Guide

Image 50

Contents Hardware Reference Guide Page Contents Specifications Hard Drive Installation Guidelines Index Product Features Standard Configuration FeaturesFront Panel Components Front Panel ComponentsRear Panel Components Rear Panel ComponentsEasy Access Keyboard Components Easy Access Keyboard ComponentsCustomizing the Easy Access Buttons Using the Windows Logo Key Special Mouse FunctionsSerial Number Location Hardware Upgrades Installation SequenceDrawer Installation Method Using the Smart Cover FailSafe Key Smart Cover LockRemoving the Smart Cover Lock Screws Removing the Computer Cover Removing the Computer Cover DDR-SDRAM DIMMs Installing Additional MemoryDIMMs Installing DDR-SDRAM DIMMs Locate the memory module sockets Installing a Dimm Removing the Expansion Card Cage Installing an Expansion Card Removing the Expansion Slot Cover Install the expansion card Removing the AGP Card To replace the AGP card, reverse the above procedures Drive Positions Desktop Drive PositionsInstalling Additional Drives Upgrading the Hard DriveDisconnecting Cables from the Hard Drive Removing an Optical Drive Removing the Optical Drive Installing an Optional Optical Drive Connecting the Flat Ribbon Cable and Audio Cable Working with the MultiBay Hot-Plugging or Hot-Swapping MultiBay Drives Partitioning and Formatting a MultiBay Hard DriveUninstalling the MultiBay Security Screw Inserting a Drive into the MultiBayRemoving a Drive from the MultiBay Removing a Drive from the MultiBay Specifications Compaq Evo Small Form FactorPower Output Hard Drive Installation Guidelines Using the Cable-Select Feature with Ultra ATA DevicesGuidelines for Installing Ultra ATA Devices Guidelines for Using Scsi Devices Scsi DevicesHard Drive Installation Guidelines Guidelines for Installing Optional Scsi Devices Scsi ControllersScsi Cables Using a Scsi CableUsing SCSISelect with Scsi Devices Choosing the Quiet Drive Options Hard Drive Installation Guidelines Battery Replacement Type Type Replacing a Coin Cell Battery Type Installing a Security Lock Security Lock ProvisionsInstalling a Security Loop Grounding Methods Electrostatic DischargePreventing Electrostatic Damage Electrostatic Discharge Routine Computer Care Shipping Preparation Routine Computer CareSafety Optical Drive PrecautionsCleaning OperationShipping Preparation Index Index-2

Related manuals

Manual 27 pages 54.23 Kb