HP D510 manual Rear Panel Components

Page 8

Product Features

Rear Panel Components

Rear Panel Components*

1	Power Cord Connector	6	Ethernet RJ-45 Connector

2	Mouse Connector	7	Parallel Connector

3	Keyboard Connector	8	Monitor Connector

4	Universal Serial Bus (USB)	9	Line-in and/or Line-out Connector
	Connectors

5	Serial Connector (COM1)	-	Serial Connector (COM2)

*Arrangement and number of connectors will vary by model.

✎The monitor connector on the system board is inactive if an AGP expansion card is installed in the computer. The monitor must be connected to the monitor connector on the installed AGP card for proper operation of the computer. If the monitor is not connected to the correct connector, it will not function properly

Hardware Reference Guide

1–3

Image 8

Contents Hardware Reference Guide Page Contents Specifications Hard Drive Installation Guidelines Index Product Features Standard Configuration FeaturesFront Panel Components Front Panel ComponentsRear Panel Components Rear Panel ComponentsEasy Access Keyboard Components Easy Access Keyboard ComponentsCustomizing the Easy Access Buttons Using the Windows Logo Key Special Mouse FunctionsSerial Number Location Hardware Upgrades Installation SequenceDrawer Installation Method Using the Smart Cover FailSafe Key Smart Cover LockRemoving the Smart Cover Lock Screws Removing the Computer Cover Removing the Computer Cover DDR-SDRAM DIMMs Installing Additional MemoryDIMMs Installing DDR-SDRAM DIMMs Locate the memory module sockets Installing a Dimm Removing the Expansion Card Cage Installing an Expansion Card Removing the Expansion Slot Cover Install the expansion card Removing the AGP Card To replace the AGP card, reverse the above procedures Drive Positions Desktop Drive PositionsInstalling Additional Drives Upgrading the Hard DriveDisconnecting Cables from the Hard Drive Removing an Optical Drive Removing the Optical Drive Installing an Optional Optical Drive Connecting the Flat Ribbon Cable and Audio Cable Working with the MultiBay Hot-Plugging or Hot-Swapping MultiBay Drives Partitioning and Formatting a MultiBay Hard DriveUninstalling the MultiBay Security Screw Inserting a Drive into the MultiBayRemoving a Drive from the MultiBay Removing a Drive from the MultiBay Specifications Compaq Evo Small Form FactorPower Output Hard Drive Installation Guidelines Using the Cable-Select Feature with Ultra ATA DevicesGuidelines for Installing Ultra ATA Devices Guidelines for Using Scsi Devices Scsi DevicesHard Drive Installation Guidelines Guidelines for Installing Optional Scsi Devices Scsi ControllersScsi Cables Using a Scsi CableUsing SCSISelect with Scsi Devices Choosing the Quiet Drive Options Hard Drive Installation Guidelines Battery Replacement Type Type Replacing a Coin Cell Battery Type Installing a Security Lock Security Lock ProvisionsInstalling a Security Loop Grounding Methods Electrostatic DischargePreventing Electrostatic Damage Electrostatic Discharge Routine Computer Care Shipping Preparation Routine Computer CareOptical Drive Precautions CleaningSafety OperationShipping Preparation Index Index-2

Related manuals

Manual 27 pages 54.23 Kb