Hardware Upgrades
3.With the top of the drive facing up and the drive connector facing the computer, slide the drive into the MultiBay and push firmly to ensure that the electrical connector is properly seated.
Inserting a Drive into the MultiBay
If the device does not start, ensure that the necessary device drivers are installed on the system. If they are not available, they may be downloaded, at no cost, from the Compaq Web site at www.compaq.com.
Removing a Drive from the MultiBay
1.Exit all software applications, shut down the operating system software, and turn off the computer if you are inserting or removing a hard drive.
2.Remove the MultiBay security screw, if it has been installed. Refer to the“Uninstalling the MultiBay Security Screw” section for instructions on removing the MultiBay security screw.
Hardware Reference Guide |