HP dx2700 manual Current password/new password/new password

Page 24

Desktop Management

To change the supervisor password, as soon as the computer is turned on, press and hold the F10 key until you enter Computer Setup. Press Enter to bypass the title screen, if necessary.

If you do not press the F10 key at the appropriate time, you must turn the computer off, then on again, and press the F10 key again to access the utility.

If you are using a PS/2 keyboard, you may see a Keyboard Error message—disregard it.

3.When the key icon appears, type your current password, a slash (/) or alternate delimiter character, your new password, another slash (/) or alternate delimiter character, and your new

password again as shown:

current password/new password/new password

Type carefully; for security reasons, the characters you type do not appear on the screen.

4.Press the Enter key.

The new password takes effect the next time you turn on the computer.

Refer to the “National Keyboard Delimiter Characters” section in this chapter for information about the alternate delimiter characters.

The user password and supervisor password may also be changed using the Security options in Computer Setup.

Deleting a User or Supervisor Password

1.Turn on or restart the computer. If you are in Windows, click Start > Shut Down > Restart. To delete the supervisor password, run Computer Setup.

2.To delete the user password, go to step 3.

To delete the supervisor password, as soon as the computer is turned on, press and hold the F10 key until you enter Computer Setup. Press Enter to bypass the title screen, if necessary.

If you do not press the F10 key at the appropriate time, you must turn the computer off, then on again, and press the F10 key again to access the utility.

If you are using a PS/2 keyboard, you may see a Keyboard Error message—disregard it.

3.When the key icon appears, type your current password followed by a slash (/) or alternate

delimiter character as shown: current password/

4.Press the Enter key.

Refer to “National Keyboard Delimiter Characters” for information about the alternate delimiter characters. The power-on password and setup password may also be changed using the Security options in Computer Setup.

 

Service Reference Guide

431672-001

3–5

Image 24 Contents
Service reference guide Service Reference Guide SeptemberService Reference Guide Contents Contents Front I/O Panel Housing Assembly MT chassis Installing the Operating System Microsoft Windows XP/Redflag LinuxConverting to Ntfs Associated with WinXP OS HP SoftwareWindows XP Home and XP Professional Setup Utilities and Diagnostics Features Power-On Self-Test PostComputer Setup Utilities Using Computer Setup F10 UtilitiesSetup Utilities and Diagnostics Features Computer Setup Menu Computer SetupHeading Option Description Features Sata Port For each, allows you to Heading OptionDescriptionCD-ROM Allows you to set Dvmt Mode to Parallel port Allows you to select a setting for the onboard S1 POS PnP/PCI IRQ Resources Configurations Recovering the Configuration Settings Backing up the CmosRestoring the Cmos Initial Configuration and Deployment FailSafe Boot Block ROM Desktop Management ROM FlashDual-State Power Button Power ManagementPassword Security Establishing a Supervisor Password Using Computer SetupEstablishing a User Password Using Computer Setup SecurityEntering a User Password Current password/new password/new password Delimiter character as shown current passwordSurge-Tolerant Power Supply National Keyboard Delimiter CharactersSerial ATA Drive Guidelines and Features Serial ATA Hard Drive CharacteristicsSata 1.5 and 3.0 Hard Drives Sata Power Cable Sata Hard Drive CablesSata Data Cable Pin Number Usage Device Plug Host PlugSata Smart Drives Drive CapacitiesWindows 2000, XP, and Linux Legacy Mode Native ModeChassis Designations Microtower MT/Small Form Factor SFFDx2708 MT Dx2700SFF Electrostatic Discharge Information Generating StaticPreventing Electrostatic Damage to Equipment Relative Humidity Event 55% 40% 10%Personal Grounding Methods and Equipment Grounding the Work AreaRecommended Materials and Equipment Static Shielding Protection Levels Method VoltageGeneral Cleaning Safety Precautions Cleaning the Computer CaseRoutine Care Cleaning the Keyboard Cleaning the MonitorCleaning the Mouse Service Considerations Tools and Software RequirementsScrews Cables and Connectors Lithium Coin Cell BatteryHard Drives Preparation for Disassembly Access Panel MT Chassis Front Bezel MT Chassis Removing the Computer Access Panel Removing the Front Bezel Installing the Tower Stand Front Drive Bezels Removing a 5.25 Drive Bezel Blank/MT ChassisInstalling Memory Modules/MT chassis MemoryInstalling DDR2-SDRAM DIMMs SFF chassis Rotating the Easy Access Drive BayInstalling a Dimm Expansion Cards Expansion Slot Cover Lock2 PCI/PCIe Expansion Card 431672-001 Installing an Expansion Card Removing the Expansion Slot CoverInstalling an Expansion Card Removing an Expansion Card Cable Management Drives Locating Drive PositionsRemoving a Drive Drive PositionsItem Description Locating Drive Positions SFF chassis Desktop Drive PositionsRemoving an Optical Drive or Diskette Drive SFF chassis Installing an Optional Optical Drive SFF chassis Installing Guide Screws in the Optical Drive Connecting the Flat Ribbon Cable and Audio Cable Upgrading the Hard Drive SFF chassis Removing and Replacing the Hard DriveRemove the screw Slide the drive to the right of the bay Front I/O Panel Housing Assembly MT chassis System Fan Heatsink MT chassis Processor 431672-001 System Board Battery Battery Holder Power Supply Connector Pin Assignments Connector and Icon Pin SignalEnhanced Keyboard MouseSerial Interface, Powered and Non-Powered Connector and Icon 1/8 miniphone Pin SignalParallel Interface MicrophoneHeadphone Line-In AudioLine-Out Audio MonitorPin Power Pin Power for CPUConnector Pin Signal Power Cord Set Requirements General RequirementsPost Error Messages Post Error MessagesScreen Message Probable Cause Recommended Action Post Error Messages Ensure the system board Bios supports the processor Default Settings Save and ExitPost Error Messages Troubleshooting Without Diagnostics Preliminary ChecklistSolving General Problems Problem Cause SolutionStandby mode Num Lock key Problem Cause Solution Solving Hardware Installation Problems Interpreting Diagnostic Lights and Audible Codes Solving Display Problems Solving Display ProblemsSelect Enable VGA Mode Set properly Accessories System Tools Click Start All ProgramsSolving Audio Problems Solving Audio ProblemsSolving Audio Problems Solving Printer Problems Solving Printer ProblemsWhere printer port is DIR C\ printer portSolving Keyboard and Mouse Problems Solving Keyboard ProblemsSolving Network Problems Solving Network ProblemsRestore Plus! CD Solving Memory Problems Solving Memory ProblemsSolving Processor Problems Solving Processor ProblemsSolving CD-ROM and DVD Problems Solving CD-ROM and DVD ProblemsSolving Drive Key Problems Solving Internet Access ProblemsSolving DiskOnKey Problems Solving Internet Access ProblemsSelect Start Control PanelOptions Delete Cookies buttonClick the Device Manager PropertiesDiagnostic Front Panel LEDs and Audible Codes Diagnostic Front Panel LEDs and Audible CodesActivity Beeps Possible Cause Recommended Action Diagnostic Front Panel LEDs and Audible Codes Diagnostic Front Panel LEDs and Audible Codes Restoring the Software Contacting Customer Support Memory
Related manuals
Manual 25 pages 21.15 Kb