HP DX2250 manual Solving General Problems, Computer will not turn on Cause Solution

Page 15

Solving General Problems

You may be able to easily resolve the minor problems described in this section. If a problem persists and you are unable to resolve it yourself or if you feel uncomfortable about performing the operation, contact your HP authorized reseller or service provider.

Computer will not turn on.

Cause

Solution

 

 

Cables to the external power source are unplugged.

Ensure that cables connecting the computer to the external power source are plugged in properly and the wall outlet is active.

Voltage selector switch on rear of computer chassis (some

Select the proper AC voltage using the selector switch.

models) not switched to correct line voltage (115V or 230V).

 

 

 

 

A defective PCI card has been installed.

Remove any expansion board that was just installed.

 

 

Drive data or power supply cables may not be properly

Reseat drive data and power supply cables.

connected.

 

 

 

 

 

The unit temperature was exceeded. The fan may be blocked.

1.

Unit is in an exceedingly hot environment. Let it cool

 

 

down.

 

2.

Ensure that computer air vents are not blocked and the

 

 

internal fan is running.

 

3.

Contact an HP authorized reseller or service provider.

 

Computer appears locked up and will not turn off when the power button is pressed.

 

 

Cause

Solution

 

 

 

Software control of the power switch is not functional.

1.Press and hold the power button for at least four seconds until the computer turns off.

2.Disconnect the power cord from the electrical outlet.

Computer will not respond to USB keyboard or mouse.

Cause

Solution

 

 

System has locked up.

Restart computer.

 

 

Keyboard or mouse is not connected to computer.

Connect keyboard and mouse cables to computer.

 

 

Computer is in standby mode.

To resume from standby mode, press the power button or

 

press any key.

CAUTION: When attempting to resume from standby mode, do not hold down the power button for more than four seconds. Otherwise, the computer will shut down and you will lose any unsaved data.

ENWW

Solving General Problems 9

Image 15
Contents Troubleshooting Guide dx2250 Microtower Model Troubleshooting Guide About This Book Iv About This Book Table of contents Enww Accessing HP Insight Diagnostics HP Insight DiagnosticsSurvey Tab Test Tab Select the Test Mode Interactive or UnattendedStatus Tab Log TabHelp Tab Downloading the Latest Version of HP Insight Diagnostics Saving and Printing Information in HP Insight DiagnosticsSafety and Comfort Before You Call for Technical Support TroubleshootingHelpful Hints Enww Solving General Problems Computer will not turn on Cause SolutionCause Solution Poor performance is experienced Cause Solution Computer date and time display is incorrect Cause SolutionStartup, go to Start Run Microsoft Windows XP or Blank screen no video Cause SolutionEnww Computer will not start Cause Solution Solving Hardware Installation ProblemsActivity Possible Cause Recommended Action Interpreting Diagnostic LightsInterpreting Diagnostic Lights HP Backup and Recovery Manager Contacting Customer Support
Related manuals
Manual 36 pages 53.64 Kb Manual 17 pages 5.48 Kb Manual 29 pages 47.87 Kb Manual 22 pages 40.83 Kb