Physical and Electrical Data 1 Phase, Model | York H*RC036S specification

036-21137-004 Rev. C (0505)

Physical and Electrical Data - 1 Phase

MODEL			H2RC018S06	H2RC024S06	H2RC030S06		H2RC036S06	H2RC042S06	H2RC048S06	H4RC060S06

Unit Supply Voltage						208/230 – 1 – 60
Normal Voltage Range							187 to 252

Minimum Circuit Ampacity1			10.1	14.1	16.5		19.7	26.2	28.5	37.5
Max. Overcurrent Device Amps 2			15	25	25		30	45	50	60
Compressor Type3			Recip	Inertia	Recip		Recip	ScrollB	Recip	ScrollB
Compressor Amps		Rated Load	7.7	10.9	12.8		14.7	19.9	21.8	28.8
Compressor Amps		Locked Rotor	48	60	68		82	115	105	145
		Locked Rotor	48	60	68		82	115	105	145

Crankcase Heater			No	No	No		Yes	No	No	No

Fan Motor Amps		Rated Load	0.5	0.5	0.5		1.3	1.3	1.3	1.5

Fan Diameter Inches			18	18	22		22	22	22	22

		Rated HP	1/12	1/12	1/15		1/4	1/4	1/4	1/4
Fan Motor
Fan Motor		Nominal RPM	1,100	1,100	850		850	850	850	850

		Nominal CFM	2,000	2,000	2,300		3,300	3,300	3,300	3,450

	Face Area Sq. Ft.		12.58	12.58	15.72		15.72	17.03	19.65	23.58
Coil
Coil	Rows Deep		1	1	1		1	1	1	1

	Fin / Inches		18	18	18		18	18	18	22

Liquid Line OD			3/8	3/8	3/8		3/8	3/8	3/8	3/8

Vapor Line OD			3/4	3/4	3/4		3/4	7/8	7/8	1-1/8

Unit Charge (Lbs. - Oz.) 4			4 - 9	4 - 7	5 - 8		5 - 3	6 - 13	7 - 7	8 - 15
Charge Per Foot, Oz.			0.68	0.68	0.68		0.68	0.70	0.70	0.76

Operating Weight Lbs.			144	146	156		161	157	190	198

PHYSICAL AND ELECTRICAL DATA - 3 Phase

MODEL			H1RC036S25	H1RC048S25	H1RC060S25		H1RC036S46	H1RC048S46	H1RC060S46
Unit Supply Voltage				208/230 – 3 – 60				460 - 3 - 60
Normal Voltage Range 1				187 to 252				432 to 504
Minimum Circuit Ampacity			13.3	18.9		22.9	7.6	9.6	12.0
Max. Overcurrent Device Amps 2			20	30		40	15	15	20
Compressor Type			Inertia	Inertia		Scroll	Inertia	Inertia	Scroll
Compressor Amps		Rated Load	9.6	14.1		17.3	5.4	7.0	9.0
Compressor Amps		Locked Rotor	78.0	130.0		123.0	40.0	64.0	62.0
		Locked Rotor	78.0	130.0		123.0	40.0	64.0	62.0
Crankcase Heater			No	No		No	No	No	No
Fan Motor Amps		Rated Load	1.3	1.3		1.3	0.8	0.8	0.8
Fan Diameter Inches			22	22		22	22	22	22
		Rated HP	1/4	1/4		1/4	1/4	1/4	1/4
Fan Motor		Nominal RPM	850	850		850	850	850	850
		Nominal CFM	3,300	3,300		3,400	3,300	3,300	3,400
	Face Area Sq. Ft.		15.72	17.03		23.58	15.72	17.03	23.58
Coil	Rows Deep		1	1		1	1	1	1
	Fin / Inches		18	18		18	18	18	18
Liquid Line OD			3/8	3/8		3/8	3/8	3/8	3/8
Vapor Line OD			3/4	7/8		1-1/8	3/4	7/8	1-1/8
Unit Charge (Lbs. - Oz.) 4			6 - 2	7 - 10		9 - 3	6 - 2	7 - 10	9 - 3
Charge Per Foot, Oz.			0.68	0.70		0.76	0.68	0.70	0.76
Operating Weight Lbs.			157	184		198	157	184	198

1.Rated in accordance with ARI Standard 110, utilization range “A”.

2.Dual element fuses or HACR circuit breaker.

3.All scrolls listed with a superscript “B” are Bristol scrolls. All scrolls listed with a superscript “C” are Copeland scrolls.

4.The Unit Charge is correct for the outdoor unit, matched indoor coil and 15 feet of refrigerant tubing. For tubing lengths other than 15 feet, add or sub- tract the amount of refrigerant, using the difference in length multiplied by the per foot value.

2	Unitary Products Group

HRC018 THRU 060, HRC036S specifications

The York H*RC036S and H*RC018 through H*RC060 are high-performance, energy-efficient rooftop units designed for commercial and industrial applications. These units are engineered to deliver exceptional heating and cooling performance while maintaining a low environmental impact. Both models leverage advanced technologies to ensure optimal indoor climate control and enhanced user comfort.

One of the standout features of the York H*RC series is its cutting-edge inverter technology. This innovation allows the units to adjust their cooling and heating capacity based on real-time demand, enabling significant energy savings. By operating at varying speeds, these rooftop units minimize energy consumption during off-peak times, contributing to a reduced overall carbon footprint.

The H*RC series is equipped with advanced microprocessor controls, which streamline operational management and provide users with precise control over their HVAC systems. The intuitive interface allows for easy programming and monitoring of performance, ensuring that users can maintain an ideal indoor environment with minimal effort.

In terms of construction, the H*RC units boast a robust build, designed to withstand harsh weather conditions while ensuring long-term durability. The units are equipped with high-efficiency fans and heat exchangers that optimize airflow and thermal exchange, enhancing overall performance and reliability.

Noise reduction is another key characteristic of the York H*RC series. These rooftop units are designed with sound-dampening features that minimize operational noise, making them suitable for noise-sensitive environments such as hospitals, schools, and office buildings.

The H*RC series also incorporates advanced filtration systems to improve indoor air quality. These systems effectively remove pollutants and allergens from the air, contributing to a healthier and more comfortable living and working environment.

Additionally, the York H*RC036S and H*RC018 through H*RC060 models are compliant with the latest regulations and standards, ensuring that they deliver efficient performance while adhering to environmental guidelines.

With a wide range of capacities and configurations available, the York H*RC series is versatile and can be tailored to meet specific application needs. Overall, these rooftop units represent a perfect blend of technology, energy efficiency, and reliability, making them an excellent choice for commercial and industrial HVAC applications.