York TCGF24, TCGF60 warranty Sound Power Ratings

Page 12

413432-YTG-A-0608

ACCESSORIES

Refer to Price Manual for specific model numbers.

HARD START KIT - Required when using TXV indoor coil. Also, provides increased starting torque for areas with low voltage.

Model

Source 1 Kit numbers

24

S1-2SA06721706

30

S1-2SA06705906

36

S1-2SA06708906

42

S1-2SA06708806

48

S1-2SA06708806

60

S1-2SA06707906

OFF CYCLE TIMER DELAY - Provides a 5-minute off cycle to prevent rapid recycling of the compressor.

ROOM THERMOSTATS - A wide selection of compatible thermosets are available to provide optimum performance and features for any installation.

1H/1C, manual changeover electronic non-programmable thermostat.

1H/1C, auto/manual changeover, electronic programmable, deluxe 7-day, thermostat.

1H/1C, auto/manual changeover, electronic programmable.

*For the most current accessory information, refer to the price book or consult factory.

SOUND POWER RATINGS*

UNIT MODEL

(dBA)

24

TBD

30

TBD

36

TBD

42

TBD

48

TBD

60

TBD

* Rated in accordance with ARI 270-95 Standards.

TYPICAL INSTALLATION

 

MINIMUM 18” SERVICE

 

60” OVERHEAD

ACCESS CLEARANCE

THERMOSTAT

ON ONE SIDE

CLEARANCE

 

 

 

 

WEATHERPROOF

 

 

DISCONNECT

 

 

SWITCH

 

 

 

NEC CLASS 1 WIRING

6” CLEARANCE

 

TO FURNACE OR

AROUND PERIMETER

 

AIR HANDLER

 

 

TERMINAL BLOCK

 

 

NEC CLASS 2 WIRING

 

 

TO INDOOR COIL

NOTE:

 

 

ALL OUTDOOR WIRING

CONTROL

 

MUST BE WEATHERPROOF.

 

ACCESS

SEAL OPENING(S) WITH

 

 

PANEL

PERMAGUM OR EQUIVALENT

TYPICAL FIELD WIRING

ALL FIELD WIRING TO BE IN ACCORDANCE WITH ELECTRIC CODE (NEC) AND/OR LOCAL CODES

POWER WIRING

208/230-1-60

POWER WIRING

24 VOLT CONTROL WIRING

 

CONTROL WIRING

MINIMUM 18 GA. WIRE

 

 

 

 

FACTORY WIRING

(NEC CLASS 2)

 

 

 

 

 

 

FURNACE OR AIR HANDLER TERMINAL BLOCK

CONTACTOR

TERMINALS

GND.

LUGCOIL

CONDENSING UNIT

C Y R G W

* TERMINAL W IS ONLY REQUIRED ON SYSTEMS WITH HEAT.

*

Y R G W

ROOM THERMOSTAT

ALL OUTDOOR WIRING MUST BE WEATHERPROOF. USE COPPER CONDUCTORS ONLY.

12

Johnson Controls Unitary Products

Image 12
Contents Listed Physical and Electrical Data ModelJohnson Controls Unitary Products Procedures FootnotesUnit AIR Handler Cooling Rated NET MBH ModelSeer EER SensSeer AC with AV / SV / F*FV Variable Speed Seer AC with AHP / SHP / F*FPTotal Sens Cooling Capacity With Variable Speed Furnaces FC/MC/PC48D UC60C Variable Speed Cooling Unit Model Furnace Model MODEL1 RatedSeer EER CFM Sound Power Ratings Temperature AIR Conditioner Model no TCGF24S41S1 Indoor Coil Model noCondensing Entering AIRAir Handler Coil AIR Conditioner Model no TCGF30S41S1 Indoor Coil Model no HC36 HC42 HD36 HD48 UC30 1000 1200 1400 AV/SV48 FC/MC/PC42 FC/MC/PC43 FC/MC/PC60 FC/MC62 FC/MC/PC48 FC/MC62 AV/SV60 MV20D FC/MC60D MA20D FC/MC62D Johnson Controls Unitary Products York Drive Norman, OK

TCGF60, TCGF24 specifications

The York TCGF24 and TCGF60 are cutting-edge technologies designed to enhance the performance and efficiency of air conditioning systems. These units have gained significant popularity due to their advanced features, reliable performance, and energy-saving capabilities.

The TCGF24 and TCGF60 models are part of York's renowned line of commercial cooling products, designed primarily for larger spaces requiring consistent climate control. One of the standout features of these models is their powerful cooling capacity. The TCGF24 offers a cooling capacity of 24 tons, while the TCGF60 boasts an impressive 60 tons, making them suitable for a wide range of applications, from office buildings to industrial facilities.

Efficiency is a crucial consideration in today’s HVAC systems, and York has incorporated several technologies to ensure that both the TCGF24 and TCGF60 deliver optimal performance with reduced energy consumption. They utilize scroll compressors, which are known for their reliability and efficiency, helping to minimize energy costs. The units also come with advanced variable speed drive technology, allowing them to adjust motor speeds based on the cooling demands, further enhancing energy efficiency.

Both models are designed with user-friendliness in mind. They are equipped with intuitive control systems that simplify operation and monitoring. Building management systems can easily interface with these units, providing real-time data on performance and energy use. This feature allows facility managers to proactively manage the cooling system, ensuring that it operates at peak performance while adhering to sustainability goals.

In addition to performance and efficiency, durability is a key characteristic of the TCGF24 and TCGF60. Constructed with high-quality materials, these units are designed to withstand challenging environmental conditions. They come with robust insulation and weatherproof casings, ensuring longevity and reliable operation even in demanding situations.

The York TCGF24 and TCGF60 are also designed with environmental considerations in mind. They use refrigerants that have a lower global warming potential, aligning with modern regulations and sustainability initiatives. This focus on eco-friendly solutions further solidifies York's commitment to innovation in the HVAC industry.

In conclusion, the York TCGF24 and TCGF60 stand out as superior choices for commercial cooling solutions. With their advanced technologies, energy efficiency, user-friendly design, and enhanced durability, they offer reliable performance that meets the demands of today's commercial environments while also prioritizing environmental responsibility. These models exemplify York's dedication to providing innovative HVAC solutions that cater to both efficiency and sustainability.