BOTTOM VIEW
2
1
1.Adapter socket
2.Battery compartment
REMOTE SENSOR
2
1
4
3 | 5 |
1.LED status indicator
2.Wall mount hole
3.Battery compartment
4.RESET hole: Reset unit to default settings
5.CHANNEL switch: Select channel 1
GETTING STARTED
POWER SUPPLY
2 x CR2032 batteries To insert batteries:
1.Remove the battery compartment cover.
2.Insert the batteries, matching the polarities.
3.Press RESET after each battery change.
LOCATION | MEANING | |
|
| |
Clock area | Main unit batteries low | |
|
| |
Outdoor / indoor | Sensor batteries low | |
temperature area | ||
| ||
|
|
1 x adapter:
Alternatively, use the adapter supplied to power the unit. For continuous use of projector / backlight, adapter must be installed.
Make sure the adapter is not obstructed and is easily accessible to the unit.
NOTE The main unit and adapter should not be exposed to wet conditions. No objects filled with liquid, such as vases, should be placed on the main unit and adapter.
To completely disconnect from power, the adapter should be disconnected from the main unit.
will appear when power supply is not connected.
EN
3
