Mitsubishi Electronics LDT521V „Enlarge, „Schedule, In horizontal orientation, Setting procedure

„Enlarge

•You can align several monitors and integrate them into a single large screen to display.

•Up to five monitors can be aligned in both the horizontal and vertical directions.

•Each monitor displays enlarged views of separated images.

(Example)

Horizontal direction: 2 monitors

Vertical direction: 2 monitors

Horizontal direction: 3 monitors

Vertical direction: 2 monitors

Setting procedure

In the ENLARGE menu, set ENLARGE H/V and ENLARGE-POS H/V. (See page 8.)

1.Set the number of monitors aligned in the horizontal direction in ENLARGE H.

2.Set the number of monitors aligned in the vertical direction in ENLARGE V.

3.Set the section of the separated image to be displayed on each monitor in ENLARGE-POS H and

ENLARGE-POS V.

In horizontal orientation

ENLARGE H

	1		2		3		4		5
1		(1,1)		(2,1)		(3,1)		(4,1)		(5,1)

ENLARGEV	2	(1,2)	(2,2)	(3,2)	(4,2)	(5,2)
	3	(1,3)	(2,3)	(3,3)	(4,3)	(5,3)
	4	(1,4)	(2,4)	(3,4)	(4,4)	(5,4)
	5	(1,5)	(2,5)	(3,5)	(4,5)	(5,5)

In vertical orientation

ENLARGE H

5	4	3	2	1
(5,1)	(4,1)	(3,1)	(2,1)	(1,1)	1
(5,2)	(4,2)	(3,2)	(2,2)	(1,2)	2
					ENLARGEV
(5,3)	(4,3)	(3,3)	(2,3)	(1,3)
					3
(5,4)	(4,4)	(3,4)	(2,4)	(1,4)	4
					5
(5,5)	(4,5)	(3,5)	(2,5)	(1,5)

*The numbers in parentheses are the setting values in (ENLARGE-POS H, ENLARGE-POS V) format.

Menu Items

TIPS

•AV input signals cannot be used for the Enlarge function.

•To connect 6 or more monitors using PC1 signals, a splitter for the video signal (commercially available) is required.

•When connected in PC2/PC3/PC4, a splitter for the video signal (commercially available) is required.

•When Enlarge is used, the AUTO INPUT CHANGE function is disabled.

•When Enlarge is used, the SCREEN MOTION function is disabled.

•To cancel the enlargement, set 1 for ENLARGE H and ENLARGE V respectively.

„SCHEDULE

You can set the time to switch the monitor on and off.

Set this function with “SCHEDULE” in the OPTION menu. (See page 7.)

SCHEDULE				PC3 D-SUB
	XXXX/XX/XX XXX XX:XX:XX
No. (1) POWER (2)		DAY OF THE WEEK (3)	TIME(4) INPUT (5)

OK…[MENU]

1 9 2 0 x 1 0 8 0 V: 60 Hz H: 66.3 kHz

1.Press or to select the SCHEDULE number, and press .

2.Set the SCHEDULE. (See the description below.)

Press or to select items, and press or to change the setting.

3.Press MENU .

SCHEDULE becomes effective.

(1)

• : SCHEDULE effective

-: SCHEDULE not effective

(2) POWER

ON : Switches the monitor on at the specified time.

OFF : Switches the monitor off at the specified time and puts the monitor in standby mode.

(3) DAY OF THE WEEK

Specifies the day of the week to execute the SCHEDULE. ONLY ONCE:

Executes the SCHEDULE once on the specified day. Specify the day of the week to execute the SCHEDULE.

EVERY WEEK:

Executes the SCHEDULE on the specified day of the week every week. Specify the day of the week to execute the

SCHEDULE.

Periodic setting such as “Monday through Friday” is also possible.

EVERY DAY:

Executes the SCHEDULE every day regardless of the day of the week.

(4) TIME

Specifies the time to execute the SCHEDULE.

Set the time on a 24-hour basis.

9 E