EN
To toggle alarms ON / OFF:
1. | Press | to display alarm time. |
2. | Press | again to turn alarm ON / OFF. |
To silence the alarm:
•Touch SNOOZE / LIGHT to silence it for 8 minutes
OR
•Press any other key to turn the alarm off and activate it again after 24 hours.
TEMPERATURE
To toggle temperature unit:
•Press °C / °F.
To toggle between outdoor / indoor sensor readings:
• Press TEMP. | / | indicates indoor and |
outdoor temperature. |
| |
exhausted, the projection feature will be disabled.
To project image briefly:
•Touch SNOOZE / LIGHT.
To flip projected image by 180º:
•Touch SNOOZE / LIGHT.
To adjust location of projected image:
•Swivel the projection arm as required.
NOTE If projection is illuminated, do not look directly into the projector.
To auto toggle indoor / outdoor temperature displays:
• Press and hold TEMP.
| To deactivate auto toggle function, press TEMP. |
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
| NOTE | To save battery life, the projector and backlight | |
PROJECTION |
| ||||||
| will only operate continuously when adapter is | ||||||
|
|
|
| ||||
| NOTE | For continuous projection, install adapter. |
| installed. | |||
|
|
| |||||
To activate / deactivate continuous projection |
|
|
|
|
| ||
(when adapter is connected): |
| BACKLIGHT | |||||
• Slide PROJECTION switch to ON / OFF. |
|
|
|
|
| ||
|
| NOTE | Install adapter to use backlight function. When | ||||
Image can still be projected when no adapter is |
|
| |||||
| the adapter is not connected, the backlight feature will | ||||||
connected. However, when the battery power is low / | 6 | be disabled. | |||||
|
|
|
|
|
|
| |
