CAUTION Regardless of the
5.Remove the computer access panel.
CAUTION After removing the access panel, look for the LED on the system board to the right of the DIMM sockets. If the LED is illuminated, the system still has power. Turn off the computer and remove the power cord before proceeding.
6.Locate the correct vacant expansion socket on the system board and the corresponding expansion slot on the back of the computer chassis.
7.Push down and out on the two green thumb tabs inside the chassis and rotate the expansion card retention latch up.
Figure 2-10 Opening the Expansion Slot Retainer
8.Before installing an expansion card, remove the expansion slot cover or the existing expansion card.
22 Chapter 2 Hardware Upgrades | ENWW |