HP dc7700 tower manual Installing Additional Drives

Page 35

Installing Additional Drives

The computer supports up to five drives that may be installed in various configurations.

When installing additional drives, follow these guidelines:

The primary Serial ATA (SATA) hard drive must be connected to the dark blue SATA connector on the system board labeled SATA0.

Connect the first SATA optical drive to the white SATA connector on the system board labeled SATA1.

Always populate the dark blue SATA0 and white SATA1 connectors before the light blue SATA2 and orange SATA3 connectors.

Connect a second SATA optical drive to the orange SATA3 connector.

Connect additional SATA hard drives to the next available (unpopulated) SATA connector on the system board in the following order: SATA0, SATA1, SATA3, SATA2.

Connect a diskette drive to the connector labeled FLOPPY P10.

The system does not support Parallel ATA (PATA) optical drives or PATA hard drives.

You may install either a third-height or a half-height drive into a half-height bay.

You must install guide screws to ensure the drive will line up correctly in the drive cage and lock in place. HP has provided extra guide screws installed on the chassis. The hard drive uses 6-32 standard screws, four of which are installed on the hard drive bracket under the access panel. All other drives use M3 metric screws, eight of which are installed on the diskette drive bracket under the access panel. The HP-supplied metric screws are black. The HP-supplied standard screws are silver.

CAUTION To prevent loss of work and damage to the computer or drive:

If you are inserting or removing a drive, shut down the operating system properly, turn off the computer, and unplug the power cord. Do not remove a drive while the computer is on or in standby mode.

Before handling a drive, ensure that you are discharged of static electricity. While handling a drive, avoid touching the connector. For more information about preventing electrostatic damage, refer to Appendix D, Electrostatic Discharge.

Handle a drive carefully; do not drop it.

Do not use excessive force when inserting a drive.

Avoid exposing a hard drive to liquids, temperature extremes, or products that have magnetic fields such as monitors or speakers.

If a drive must be mailed, place the drive in a bubble-pack mailer or other protective packaging and label the package “Fragile: Handle With Care.”

ENWW

Installing Additional Drives 29

Image 35
Contents Hardware Reference Guide dc7700 Series Convertible Minitower Hardware Reference Guide About This Book About This Book Table of contents Appendix C External Security Devices Standard Configuration Features Product FeaturesFront Panel Components Drive configuration may vary by model2Media Card Reader Components Media Card Reader Components3Rear Panel Components Rear Panel Components4Keyboard Components KeyboardUsing the Windows Logo Key Serial Number Location Special Mouse FunctionsEnww Serviceability Features Hardware UpgradesSmart Cover FailSafe Key Unlocking the Smart Cover LockUnlocking the Smart Cover Lock 2Removing the Computer Access Panel Hardware Upgrades Removing the Computer Access Panel3Replacing the Computer Access Panel Replacing the Computer Access PanelRemoving the Front Bezel 4Removing the Front Bezel Hardware Upgrades5Replacing the Front Bezel Replacing the Front BezelRemoving Bezel Blanks DDR2-SDRAM DIMMs Installing Additional MemoryDIMMs Description Socket Color Populating Dimm SocketsInstalling DIMMs Enww Description Removing or Installing an Expansion CardEnww 12Removing a Standard PCI Expansion Card Enww Enww 15Desktop and Minitower Drive Positions Drive PositionsRemoving a Drive from a Drive Bay Enww Installing Additional Drives Enww Enww Enww 21Installing the Hard Drive Guide Screws Enww Enww Changing from a Minitower to a Desktop Configuration Changing from a Minitower to a Desktop Configuration Changing from a Desktop to a MinitowerConfiguration Changing from a Desktop to a MinitowerConfiguration Enww Desktop Dimensions SpecificationsAppendix a Specifications Battery Replacement Type Figure B-2Removing and Replacing a Coin Cell Battery Type Enww Cable Lock Installing a Security LockExternal Security Devices Padlock Grounding Methods Electrostatic DischargePreventing Electrostatic Damage Appendix D Electrostatic Discharge Computer Operating Guidelines and Routine Care Shipping Preparation Optical Drive PrecautionsCleaning SafetyIndex Enww