HP dc7700 tower manual 21Installing the Hard Drive Guide Screws

Page 39

Installing a 3.5-inch SATA Hard Drive into an Internal Drive Bay

NOTE Before you remove the old hard drive, be sure to back up the data from the old hard drive so that you can transfer the data to the new hard drive. Also, if you are replacing the primary hard drive, make sure you have the Restore Plus! CD set that you created when you initially set up the computer to restore the operating system, software drivers, and any software applications that were preinstalled on the computer. If you do not have this CD set, create it now. Refer to the HP Backup and Recovery Manager User Guide in the Windows Start menu for more information. You may wish to print this guide for easy reference.

The system does not support Parallel ATA (PATA) hard drives.

To install a hard drive in a 3.5-inch internal drive bay:

1.Remove/disengage any security devices that prohibit opening the computer.

2.Remove all removable media, such as diskettes or compact discs, from the computer.

3.Turn off the computer properly through the operating system, then turn off any external devices.

4.Disconnect the power cord from the power outlet and disconnect any external devices.

CAUTION Regardless of the power-on state, voltage is always present on the system board as long as the system is plugged into an active AC outlet. You must disconnect the power cord to avoid damage to the internal components of the computer.

5.Remove the computer access panel.

CAUTION After removing the access panel, look for the LED on the system board to the right of the DIMM sockets. If the LED is illuminated, the system still has power. Turn off the computer and remove the power cord before proceeding.

6.Install four 6-32 standard guide screws, two on each side of the drive.

Figure 2-21Installing the Hard Drive Guide Screws

NOTE The hard drive uses 6-32 standard guide screws. Four extra guide screws are installed on the hard drive bracket under the access panel. The HP-supplied standard screws are silver.

ENWW

Installing Additional Drives 33

Image 39
Contents Hardware Reference Guide dc7700 Series Convertible Minitower Hardware Reference Guide About This Book About This Book Table of contents Appendix C External Security Devices Standard Configuration Features Product FeaturesFront Panel Components Drive configuration may vary by model2Media Card Reader Components Media Card Reader Components3Rear Panel Components Rear Panel Components4Keyboard Components KeyboardUsing the Windows Logo Key Serial Number Location Special Mouse FunctionsEnww Serviceability Features Hardware UpgradesSmart Cover FailSafe Key Unlocking the Smart Cover LockUnlocking the Smart Cover Lock 2Removing the Computer Access Panel Hardware Upgrades Removing the Computer Access Panel3Replacing the Computer Access Panel Replacing the Computer Access PanelRemoving the Front Bezel 4Removing the Front Bezel Hardware Upgrades5Replacing the Front Bezel Replacing the Front BezelRemoving Bezel Blanks Installing Additional Memory DIMMsDDR2-SDRAM DIMMs Description Socket Color Populating Dimm SocketsInstalling DIMMs Enww Description Removing or Installing an Expansion CardEnww 12Removing a Standard PCI Expansion Card Enww Enww 15Desktop and Minitower Drive Positions Drive PositionsRemoving a Drive from a Drive Bay Enww Installing Additional Drives Enww Enww Enww 21Installing the Hard Drive Guide Screws Enww Enww Changing from a Minitower to a Desktop Configuration Changing from a Minitower to a Desktop Configuration Changing from a Desktop to a MinitowerConfiguration Changing from a Desktop to a MinitowerConfiguration Enww Desktop Dimensions SpecificationsAppendix a Specifications Battery Replacement Type Figure B-2Removing and Replacing a Coin Cell Battery Type Enww Installing a Security Lock External Security DevicesCable Lock Padlock Electrostatic Discharge Preventing Electrostatic DamageGrounding Methods Appendix D Electrostatic Discharge Computer Operating Guidelines and Routine Care Shipping Preparation Optical Drive PrecautionsCleaning SafetyIndex Enww