HP dc7600 manual Removing the Diskette Drive

Page 37

Hardware Upgrades

4.Lift the rear of the drive up so that the rear guide screws clear the top of the drive cage 1. As the drive rises it automatically slides forward until it is free from the drive cage 2.

Removing the Diskette Drive

To replace the diskette drive, reverse the removal procedure making sure you slide the front guide screws into the cage first then rotate the rear of the drive down and slide it back until it locks into position.

When replacing a drive, transfer the four guide screws from the old drive to the new one. The screws take the place of drive rails.

Hardware Reference Guide

www.hp.com

2-27

Image 37
Contents Hardware Reference Guide Hardware Reference Guide Contents Index Standard Configuration Features Product FeaturesFront Panel Components Front Panel ComponentsRear Panel Components Rear Panel ComponentsKeyboard Components KeyboardWindows Logo Key Special Mouse FunctionsSerial Number Location Serviceability Features Hardware UpgradesUsing the Small Form Factor Computer in a Tower Orientation Unlocking the Smart Cover Lock Using the Smart Cover FailSafe KeyRemoving the Smart Cover Lock Screw Removing the Computer Cover Replacing the Computer Cover DIMMs Installing Additional MemoryDDR2-SDRAM DIMMs Populating Dimm Sockets Description Socket Color Installing DIMMs Installing a Dimm Hardware Upgrades Installing an Expansion Card Removing the Expansion Slot Cover Installing an Expansion Card Hardware Upgrades Removing a PCI Express x16 Expansion Card Hardware Upgrades Installing Additional Drives Drive Positions Locating Drive PositionsRemoving an Optical Drive Disconnecting the Power and Data Cables Rotate the drive cage back down to its normal position Removing the Optical Drive Removing a Diskette Drive Disengaging the Diskette Drive Removing the Diskette Drive Installing an Optional Optical Drive Installing the Optical Drive Rotate the drive cage to its upright position Connecting the Power and Data Cables Rotate the drive cage back down to its normal position Removing and Replacing the Primary Hard Drive Upgrading the Sata Hard DriveRotating the Drive Cage Up Removing the Security Clip Raising the Power Supply Cage Disconnecting the Hard Drive Power Cable and Data Cable Removing the Hard Drive Installing an Optional Drive into the 3.5-inch Drive Bay Hardware Upgrades Hardware Upgrades Removing a Drive Bezel Diskette Drive Bezel shown Installing a Drive Bezel Bezel Blank for Hard Drive shown HP Compaq Small Form Factor SpecificationsPower Output Battery Replacement Type Removing and Replacing a Coin Cell Battery Type Type Security Lock Provisions Installing a Security LockCable Lock Padlock Without Security Cable Universal Chassis Clamp LockSecurity Lock Provisions With Security Cable Security Lock Provisions Preventing Electrostatic Damage Electrostatic DischargeGrounding Methods Electrostatic Discharge Computer Operating Guidelines and Routine Care Cleaning Optical Drive PrecautionsSafety OperationShipping Preparation Index Index Index-3
Related manuals
Manual 26 pages 40.74 Kb Manual 66 pages 17.44 Kb