HP dc7600 manual Hardware Upgrades

Page 28

Hardware Upgrades

7.Store the card in anti-static packaging.

8.If you are not installing a new expansion card, install an expansion slot cover to close the open slot.

9.Rotate the slot cover retention latch back in place to secure the expansion cards and expansion slot covers.

10.Replace the computer cover.

11.Plug in the power cord and and turn on the computer.

12.If you normally lock the Smart Cover Lock, use Computer Setup to relock the lock and enable the Smart Cover Sensor.

ÄCAUTION: All expansion card slots on the rear of the computer must contain either an expansion card or slot cover for proper cooling of internal components during operation.

2-18

www.hp.com

Hardware Reference Guide

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Hardware Reference Guide Hardware Reference Guide Contents Index Product Features Standard Configuration FeaturesFront Panel Components Front Panel ComponentsRear Panel Components Rear Panel ComponentsKeyboard Keyboard ComponentsSpecial Mouse Functions Windows Logo KeySerial Number Location Hardware Upgrades Serviceability FeaturesUsing the Small Form Factor Computer in a Tower Orientation Using the Smart Cover FailSafe Key Unlocking the Smart Cover LockRemoving the Smart Cover Lock Screw Removing the Computer Cover Replacing the Computer Cover DIMMs Installing Additional MemoryDDR2-SDRAM DIMMs Populating Dimm Sockets Description Socket Color Installing DIMMs Installing a Dimm Hardware Upgrades Installing an Expansion Card Removing the Expansion Slot Cover Installing an Expansion Card Hardware Upgrades Removing a PCI Express x16 Expansion Card Hardware Upgrades Installing Additional Drives Locating Drive Positions Drive PositionsRemoving an Optical Drive Disconnecting the Power and Data Cables Rotate the drive cage back down to its normal position Removing the Optical Drive Removing a Diskette Drive Disengaging the Diskette Drive Removing the Diskette Drive Installing an Optional Optical Drive Installing the Optical Drive Rotate the drive cage to its upright position Connecting the Power and Data Cables Rotate the drive cage back down to its normal position Upgrading the Sata Hard Drive Removing and Replacing the Primary Hard DriveRotating the Drive Cage Up Removing the Security Clip Raising the Power Supply Cage Disconnecting the Hard Drive Power Cable and Data Cable Removing the Hard Drive Installing an Optional Drive into the 3.5-inch Drive Bay Hardware Upgrades Hardware Upgrades Removing a Drive Bezel Diskette Drive Bezel shown Installing a Drive Bezel Bezel Blank for Hard Drive shown Specifications HP Compaq Small Form FactorPower Output Battery Replacement Type Removing and Replacing a Coin Cell Battery Type Type Security Lock Provisions Installing a Security LockCable Lock Padlock Universal Chassis Clamp Lock Without Security CableSecurity Lock Provisions With Security Cable Security Lock Provisions Preventing Electrostatic Damage Electrostatic DischargeGrounding Methods Electrostatic Discharge Computer Operating Guidelines and Routine Care Optical Drive Precautions CleaningSafety OperationShipping Preparation Index Index Index-3
Related manuals
Manual 26 pages 40.74 Kb Manual 66 pages 17.44 Kb
Top Page Image Contents