HP dc7600 manual Rotate the drive cage back down to its normal position

Page 42

Hardware Upgrades

10. Rotate the drive cage back down to its normal position.

Rotating the Drive Cage Down

ÄCAUTION: Be careful not to pinch any cables or wires when rotating the drive cage down.

11.Replace the computer cover.

12.Plug in the power cord and and turn on the computer.

13.If you normally lock the Smart Cover Lock, use Computer Setup to relock the lock and enable the Smart Cover Sensor.

The system automatically recognizes the drive and reconfigures the computer.

ÄCAUTION: When servicing the computer, ensure that cables are placed in their proper locations during the reassembly process. Improper cable placement can damage the computer.

2-32

www.hp.com

Hardware Reference Guide

Image 42

Contents Hardware Reference Guide Hardware Reference Guide Contents Index Product Features Standard Configuration FeaturesFront Panel Components Front Panel ComponentsRear Panel Components Rear Panel ComponentsKeyboard Keyboard ComponentsSpecial Mouse Functions Windows Logo KeySerial Number Location Hardware Upgrades Serviceability FeaturesUsing the Small Form Factor Computer in a Tower Orientation Using the Smart Cover FailSafe Key Unlocking the Smart Cover LockRemoving the Smart Cover Lock Screw Removing the Computer Cover Replacing the Computer Cover Installing Additional Memory DIMMsDDR2-SDRAM DIMMs Populating Dimm Sockets Description Socket Color Installing DIMMs Installing a Dimm Hardware Upgrades Installing an Expansion Card Removing the Expansion Slot Cover Installing an Expansion Card Hardware Upgrades Removing a PCI Express x16 Expansion Card Hardware Upgrades Installing Additional Drives Locating Drive Positions Drive PositionsRemoving an Optical Drive Disconnecting the Power and Data Cables Rotate the drive cage back down to its normal position Removing the Optical Drive Removing a Diskette Drive Disengaging the Diskette Drive Removing the Diskette Drive Installing an Optional Optical Drive Installing the Optical Drive Rotate the drive cage to its upright position Connecting the Power and Data Cables Rotate the drive cage back down to its normal position Upgrading the Sata Hard Drive Removing and Replacing the Primary Hard DriveRotating the Drive Cage Up Removing the Security Clip Raising the Power Supply Cage Disconnecting the Hard Drive Power Cable and Data Cable Removing the Hard Drive Installing an Optional Drive into the 3.5-inch Drive Bay Hardware Upgrades Hardware Upgrades Removing a Drive Bezel Diskette Drive Bezel shown Installing a Drive Bezel Bezel Blank for Hard Drive shown Specifications HP Compaq Small Form FactorPower Output Battery Replacement Type Removing and Replacing a Coin Cell Battery Type Type Installing a Security Lock Security Lock ProvisionsCable Lock Padlock Universal Chassis Clamp Lock Without Security CableSecurity Lock Provisions With Security Cable Security Lock Provisions Electrostatic Discharge Preventing Electrostatic DamageGrounding Methods Electrostatic Discharge Computer Operating Guidelines and Routine Care Safety Optical Drive PrecautionsCleaning OperationShipping Preparation Index Index Index-3

Related manuals

Manual 26 pages 40.74 Kb

Manual 66 pages 17.44 Kb