HP dc7600 manual Installing the Expansion Card Assembly

Page 31

Hardware Upgrades

10.Line up the tabs on the expansion card assembly with the slots on the computer chassis and press the assembly firmly down into place.

Installing the Expansion Card Assembly

11.Connect external cables to the installed card, if needed. Connect internal cables to the system board, if needed. If the card requires audio, connect the audio cable to the connector on the system board labeled “Aux” (located under the power supply cage).

12.Replace the access panel.

13.Install the optional cable lock, if desired.

14.Replace the stand, if desired.

15.Reconnect all external devices, plug the power cord into the power outlet, and turn the computer on.

16.Use Computer Setup to enable the Smart Cover Sensor, if desired.

Hardware Reference Guide

www.hp.com

2–21

Image 31

Contents Hardware Reference Guide Hardware Reference Guide Contents Index Standard Configuration Features Product FeaturesFront Panel Components Rear Panel Components Lock, and Scroll Lock Standard Keyboard ComponentsWindows Logo Key Serial Number and Product ID Location Choose Tower or Desktop ConfigurationRemoving and Replacing the Access Panel Hardware UpgradesRemoving the Access Panel Removing and Replacing the Front Bezel and MultiBay Removing the MultiBay Daughter Card Disconnect the fan cable Removing the Front Bezel and MultiBay Attaching and Removing the Tower Stand Attaching the Stand to the Computer Removing the Stand from the Computer Rotating the Computer into the Desktop Position DIMMs Installing Additional MemoryDDR2-SDRAM DIMMs Dimm Sockets Description Socket Color Adding or Removing a Memory Module Removing Memory Modules Adding Memory Modules Adding or Removing an Expansion Card Installing an Expansion Card Removing an Expansion Card Slot Cover Installing an Expansion Card Installing the Expansion Card Assembly Removing an Expansion Card Removing an Expansion Card Upgrading the Hard Drive Removing the Internal Hard Drive Hardware Upgrades Data 1 and Power 2 Cable Connector Locations Working with the MultiBay Engaging and Releasing the MultiBay Security Catch Hot-Plugging or Hot-Swapping MultiBay DrivesEngaging the MultiBay Security Catch Releasing the MultiBay Security Catch Removing a Drive from the MultiBay Inserting a Drive into the MultiBay Partitioning and Formatting a MultiBay Hard Drive Ultra-Slim Desktop SpecificationsPower Output Battery Replacement Removing the Power Supply Replacing the Battery Battery Replacement Security Provisions Installing an Optional Security LockCable Lock Padlock Without Security Cable Universal Chassis Clamp LockSecurity Provisions With Security Cable Security Provisions Preventing Electrostatic Damage Electrostatic DischargeGrounding Methods Electrostatic Discharge Computer Operating Guidelines and Routine Care Operation Optical Drive PrecautionsCleaning SafetyShipping Preparation Page Index Index Index-3

Related manuals

Manual 26 pages 40.74 Kb

Manual 73 pages 14.36 Kb