HP dc7600 manual Replacing the Battery

Page 49

Battery Replacement

8.Locate the battery and battery holder on the system board.

9.Release the battery latch and lift the battery out of the holder 1.

10.Holding the replacement battery with the positive side up, push the battery down until the latch snaps over the upper edge of the battery 2.

Replacing the Battery

✎After the battery has been replaced, use the following steps to complete this procedure.

11.Replace the power supply:

a. Gently place the left side of the power supply in place.

a.Rotate the right side of the power supply down until it stops.

b.Slide the power supply back until it locks in place.

12.Replace the MultiBay daughter card by carefully aligning the card with the connector slot and pressing the card firmly into place.

13.Replace the MultiBay drive.

Hardware Reference Guide

www.hp.com

B-3

Image 49

Contents Hardware Reference Guide Hardware Reference Guide Contents Index Standard Configuration Features Product FeaturesFront Panel Components Rear Panel Components Lock, and Scroll Lock Standard Keyboard ComponentsWindows Logo Key Serial Number and Product ID Location Choose Tower or Desktop ConfigurationRemoving and Replacing the Access Panel Hardware UpgradesRemoving the Access Panel Removing and Replacing the Front Bezel and MultiBay Removing the MultiBay Daughter Card Disconnect the fan cable Removing the Front Bezel and MultiBay Attaching and Removing the Tower Stand Attaching the Stand to the Computer Removing the Stand from the Computer Rotating the Computer into the Desktop Position DIMMs Installing Additional MemoryDDR2-SDRAM DIMMs Dimm Sockets Description Socket Color Adding or Removing a Memory Module Removing Memory Modules Adding Memory Modules Adding or Removing an Expansion Card Installing an Expansion Card Removing an Expansion Card Slot Cover Installing an Expansion Card Installing the Expansion Card Assembly Removing an Expansion Card Removing an Expansion Card Upgrading the Hard Drive Removing the Internal Hard Drive Hardware Upgrades Data 1 and Power 2 Cable Connector Locations Working with the MultiBay Engaging and Releasing the MultiBay Security Catch Hot-Plugging or Hot-Swapping MultiBay DrivesEngaging the MultiBay Security Catch Releasing the MultiBay Security Catch Removing a Drive from the MultiBay Inserting a Drive into the MultiBay Partitioning and Formatting a MultiBay Hard Drive Ultra-Slim Desktop Specifications Power Output Battery Replacement Removing the Power Supply Replacing the Battery Battery Replacement Security Provisions Installing an Optional Security LockCable Lock Padlock Without Security Cable Universal Chassis Clamp LockSecurity Provisions With Security Cable Security Provisions Preventing Electrostatic Damage Electrostatic DischargeGrounding Methods Electrostatic Discharge Computer Operating Guidelines and Routine Care Cleaning Optical Drive PrecautionsSafety OperationShipping Preparation Page Index Index Index-3

Related manuals

Manual 26 pages 40.74 Kb

Manual 73 pages 14.36 Kb