HP dc7600 manual Optical Drive Precautions, Operation, Cleaning, Safety

Page 60

Computer Operating Guidelines, Routine Care and Shipping Preparation

■Turn off the computer before you do either of the following:

❏Wipe the exterior of the computer with a soft, damp cloth as needed. Using cleaning products may discolor or damage the finish.

❏Occasionally clean the air vents on all vented sides of the computer. Lint, dust, and other foreign matter can block the vents and limit the airflow.

Optical Drive Precautions

Be sure to observe the following guidelines while operating or cleaning the optical drive.

Operation

■Do not move the drive during operation. This may cause it to malfunction during reading.

■Avoid exposing the drive to sudden changes in temperature, as condensation may form inside the unit. If the temperature suddenly changes while the drive is on, wait at least one hour before you turn off the power. If you operate the unit immediately, it may malfunction while reading.

■Avoid placing the drive in a location that is subject to high humidity, extreme temperatures, mechanical vibration, or direct sunlight.

Cleaning

■Clean the panel and controls with a soft, dry cloth or a soft cloth lightly moistened with a mild detergent solution. Never spray cleaning fluids directly on the unit.

■Avoid using any type of solvent, such as alcohol or benzene, which may damage the finish.

Safety

If any object or liquid falls into the drive, immediately unplug the computer and have it checked by an authorized HP service provider.

E–2

www.hp.com

Hardware Reference Guide

Image 60

Contents Hardware Reference Guide Hardware Reference Guide Contents Index Product Features Standard Configuration FeaturesFront Panel Components Rear Panel Components Standard Keyboard Components Lock, and Scroll LockWindows Logo Key Choose Tower or Desktop Configuration Serial Number and Product ID LocationHardware Upgrades Removing and Replacing the Access PanelRemoving the Access Panel Removing and Replacing the Front Bezel and MultiBay Removing the MultiBay Daughter Card Disconnect the fan cable Removing the Front Bezel and MultiBay Attaching and Removing the Tower Stand Attaching the Stand to the Computer Removing the Stand from the Computer Rotating the Computer into the Desktop Position Installing Additional Memory DIMMsDDR2-SDRAM DIMMs Dimm Sockets Description Socket Color Adding or Removing a Memory Module Removing Memory Modules Adding Memory Modules Adding or Removing an Expansion Card Installing an Expansion Card Removing an Expansion Card Slot Cover Installing an Expansion Card Installing the Expansion Card Assembly Removing an Expansion Card Removing an Expansion Card Upgrading the Hard Drive Removing the Internal Hard Drive Hardware Upgrades Data 1 and Power 2 Cable Connector Locations Working with the MultiBay Hot-Plugging or Hot-Swapping MultiBay Drives Engaging and Releasing the MultiBay Security CatchEngaging the MultiBay Security Catch Releasing the MultiBay Security Catch Removing a Drive from the MultiBay Inserting a Drive into the MultiBay Partitioning and Formatting a MultiBay Hard Drive Specifications Ultra-Slim DesktopPower Output Battery Replacement Removing the Power Supply Replacing the Battery Battery Replacement Installing an Optional Security Lock Security ProvisionsCable Lock Padlock Universal Chassis Clamp Lock Without Security CableSecurity Provisions With Security Cable Security Provisions Electrostatic Discharge Preventing Electrostatic DamageGrounding Methods Electrostatic Discharge Computer Operating Guidelines and Routine Care Optical Drive Precautions CleaningSafety OperationShipping Preparation Page Index Index Index-3

Related manuals

Manual 26 pages 40.74 Kb

Manual 73 pages 14.36 Kb