HP dc5750 manual 22Installing the Optical Drive Hardware Upgrades

Page 36

8.Install two M3 metric guide screws in the lower holes on each side of the drive. HP has provided four extra M3 metric guide screws on the front of the chassis, under the front bezel. The M3 metric guide screws are black.

CAUTION Use only 5-mm long screws as guide screws. Longer screws can damage the internal components of the drive.

NOTE When replacing the drive, transfer the four M3 metric guide screws from the old drive to the new one.

Figure 2-21Installing Guide Screws in the Optical Drive

9.Align the guide screws on the drive with the slots on the chassis. Slide the drive all the way down

(1) then slide it forward (2) until it locks into place.

Figure 2-22Installing the Optical Drive

30 Chapter 2 Hardware Upgrades

ENWW

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Hardware Reference Guide dc5750 Small Form Factor Model Hardware Reference Guide About This Book Iv About This Book Table of contents Appendix D Electrostatic Discharge Product Features Standard Configuration FeaturesDrive configuration may vary by model Front Panel ComponentsRear Panel Components 2Rear Panel ComponentsKeyboard 3Keyboard ComponentsUsing the Windows Logo Key Special Mouse Functions Serial Number LocationHardware Upgrades Serviceability FeaturesUsing the Small Form Factor Computer in a Tower Orientation Using the Small Form Factor Computer in a Tower Orientation Removing the Computer Access Panel 2Removing the Computer Access Panel Hardware UpgradesReplacing the Computer Access Panel 3Replacing the Computer Access Panel4Removing the Front Bezel Hardware Upgrades Removing the Front BezelRemoving Bezel Blanks 5Removing a Bezel Blank Replace the front bezel6Replacing the Front Bezel Hardware Upgrades Replacing the Front BezelInstalling Additional Memory DIMMsDDR2-SDRAM DIMMs Populating Dimm Sockets Description Socket ColorInstalling DIMMs 9Rotating Optical Drive Retainer Up Hardware Upgrades Enww Removing or Installing an Expansion Card Description12Removing the Expansion Slot Retainer 13Removing an Expansion Slot Cover Hardware Upgrades 15Removing a PCI Express x16 Expansion Card 16Installing an Expansion Card Hardware Upgrades Replace the slot cover retainer Drive Positions 18Drive PositionsInstalling and Removing Drives Removing an Optical Drive 20Removing the Optical Drive 22Installing the Optical Drive Hardware Upgrades Enww 24Disconnecting the Diskette Drive Cables Hardware Upgrades Removing a Diskette Drive26Removing the Diskette Drive Enww 29Installing a Diskette Drive Enww Enww 32Disengaging the Diskette Drive Hardware Upgrades 34Disconnecting the Hard Drive Power Cable and Data Cable Enww Enww Enww Specifications Power Supply 115V 230VRated Input Current maximum1 Battery Replacement Type Figure B-2Removing and Replacing a Coin Cell Battery Type Enww Installing a Security Lock External Security DevicesCable Lock Padlock Electrostatic Discharge Preventing Electrostatic DamageGrounding Methods Appendix D Electrostatic Discharge Computer Operating Guidelines and Routine Care Optical Drive Precautions CleaningSafety Shipping PreparationIndex Enww
Related manuals
Manual 52 pages 58.36 Kb Manual 72 pages 24 Kb
Top Page Image Contents